List of Publications
2024
84. Albin Kuriakose, Pariksha Malik, Jitendra Nath
Acharyya, Dinesh Kalyanasundaram, Pankaj Srivastava, and G Vijaya Prakash*
“Nanosecond laser induced periodic silicon microstructures for broadband
antireflective applications”, Optics and Laser Technology, Accepted, 2024. I. F – 5.0.
82. Manjeet Singh, Mohd Anees, Aiman Afreen, Dinesh
Kalyanasundaram, Naresh Bhatnagar, Harpal Singh,* “Development of iodine
based sustained release antimicrobial coatings for polyurethane voice
prostheses”, Journal of Materials Chemistry B, Accepted, 2024. I. F – 7.0.
80. Rajdeep Shankar Pawar, Sunil Kumar Yadav and Dinesh
Kalyanasundaram,* “Evaluation of the stresses on the knee
meniscus tissue under various loading conditions and correlation with resulting
meniscal tears observed clinically: A Finite Element Study”, Journal of the
Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, 304, 2024 I.F.
– 2.2.
(https://doi.org/10.1007/s40430-024-04877-z)
Implants – New
materials for Chondrogenesis
Implants –
Surface modification
2023
(https://doi.org/
10.1021/acsbiomaterials.3c00436)
Nanoscale structures –
Fabrication and evaluation
73. Vinod Parmar,
Sonu Singh, Arvind Singh, Sunil Kumar, and Dinesh Kalyanasundaram,* “Hybrid
thermo-physical modelling and experimentation of ultrafast laser-based fabrication of polycrystalline
core-amorphous shell nitinol nanoparticles”, Optics and Laser Technology, Vol.
165, 109575, 2023. I. F – 4.939.
(https://doi.org/10.1016/j.optlastec.2023.109575)
Implants –
Amniotic membrane based biomaterial
72. Bhawna, Sunil Gujjar, KS Venkataprasanna, Shivam
Tiwari, Jagadish Chandra Sharma, Priyanka Sharma, Mukta Pujani, Anil Kumar
Pandey, Prasad Abnave, Dinesh Kalyanasundaram, Santosh Mathapati,
“Stabilized human amniotic membrane for enhanced sustainability and
biocompatibility”, Process Biochemistry, Vol. 129, pp. 67-75, 2023. I. F. –
4.885.
(https://doi.org/10.1016/j.procbio.2023.03.009)
Implants – Orthopedic
(Polymeric screws)
71. Sunil Kumar Yadav,$ Arnab Sikidar,$
and Dinesh Kalyanasundaram, “Design of Polymeric Orthopedic
Screws with Variable Stiffness and Multi-Objective Optimization of Injection
Molding Process”, International journal of precision engineering and
manufacturing, Vol. 24, pp. 629-643, 2023. I. F. – 2.041.
(https://doi.org/10.1007/s12541-023-00775-x)
Implants –
Dental applications
70. Immaculata Jonna, Kalpana Bansal, Rahul Morankar,
Vijay Prakash Mathur, Dinesh Kalyanasundaram, Nitesh Tewari, and Shivam
Pandey, “Effect of SDF/SSKI application on micro-tensile bond
strength of composite resin to carious primary dentin - An in-vitro
study”, Pediatric Dentistry, Vol. 45, pp. 147-152, 2023. I. F. – 2.378.
(https://pubmed.ncbi.nlm.nih.gov/37106537/)
Implants –
Manufacturing by Electric discharge machining
69. Amit Mahajan, Sandeep Devgan, and Dinesh
Kalyanasundaram, “Electrical Discharge Machining- A Futuristic
Technique for Surface Engineering of Biomedical Alloys: A concise review”,
Surface Topography: Metrology and Properties, Vol. 10, 043001, 2023. I. F. – 4.783.
(https://doi.org/10.1080/10426914.2022.2105873)
Composites – Carbon-PEEK composite
manufacturing
68. V. Balakumaran,* Ramasamy Alagirusamy, Dinesh
Kalyanasundaram, “A multi-scale aqueous dispersion coating technique for
manufacturing carbon fiber reinforced PEEK composite”, Composites Part A:
Applied Science and Manufacturing, Vol. 165, 107314, 2023. I. F. – 9.463
(https://doi.org/10.1016/j.compositesa.2022.107314)
2022
Composites – Effect of radial
alignment of fibers
67. Vijay Goud,* Ashraf Khan, Ramasamy
Alagirusamy, Apurba Das and Dinesh Kalyanasundaram, “Mechanical
properties of flax-polypropylene composites from dry flexible towpregs:
Influence of radial position of flax fibers in the towpreg”, Journal of Natural
Fibers, Vol. 19, pp. 15225-15237, 2022. I. F. – 3.507.
(https://doi.org/10.1080/15440478.2022.2120591)
Implants – New
materials for Chondrogenesis
66. Misba
Majood, Adeeba Shakeel, Sampathkumar Jeevanandham, Rohan Bhattacharya, Dakshi
Kochhar, Aakanksha Agarwal, Aarti Singh, Dinesh Kalyanasundaram, Sujata Mohanty,*
Monalisa Mukherjee,* “Hydrogel Nanosheets Confined 2D Rhombic Ice: A New
Platform Enhancing Chondrogenesis”, Biomedical Materials, Vol. 17, 065004, 2022. I. F – 4.103.
(https://doi.org/ 10.1088/1748-605X/ac8e43)
Implants –
Manufacturing by Electric discharge machining
65. Amit
Mahajan,* Sandeep Devgan, and Dinesh Kalyanasundaram, “Surface
alteration of Cobalt-Chromium and Duplex Stainless-Steel alloys for biomedical
applications: A concise review”, Materials and Manufacturing Processes,
Accepted, 2022. I.
F. – 4.783.
(https://doi.org/10.1080/10426914.2022.2105873)
Biomechanics –
Modeling and experimentation of Ankle-foot model
64. Arnab Sikidar and Dinesh
Kalyanasundaram,* “An open-source OpenSim® ankle-foot musculoskeletal model
for assessment of strains and forces in dense connective tissues”, Computer
Methods and Programs in Biomedicine, Vol. 224, 106994, 2022. I. F. – 7.027.
(https://doi.org/10.1016/j.cmpb.2022.106994)
Biomechanics –
Classification of AIS subjects via machine learning
63. Arnab Sikidar, K. E. C.
Vidyasagar, Manish Gupta, Bhavuk Garg, and Dinesh Kalyanasundaram,*
“Classification of mild and severe adolescent idiopathic scoliosis (AIS) from
healthy subjects via a supervised learning model based on electromyogram and
ground reaction force data during gait”, Biocybernetics and Biomedical
engineering, Vol. 42, pp. 870-887,
2022. I.
F. – 5.687.
(https://doi.org/10.1016/j.bbe.2022.06.006)
Diagnostics – Prescription pattern for Enteric
fever
62. Soumyadip
Chatterji, Priyanka Sharma, Avinash Kaur, Dinesh Kalyanasundaram,
Ashutosh Biswas, Naveet Wig, Arti Kapil,* “A study on the clinical spectrum,
prescription pattern and diagnosis of enteric fever in a tertiary care hospital
of North India”, International Journal Of Community Medicine And Public Health,
Vol. 9, pp. 2633-2638, 2022.
(https://dx.doi.org/10.18203/2394-6040.ijcmph20221546)
61. Rohan Chawla, Jayanta Bhattacharyya, Laxmi
Moksha, Anjali Phour, Thirumurthy Velpandian, Seema Kashyap, and Dinesh
Kalyanasundaram,* “A novel, minimally invasive implant to assist in
repeated intraocular drug delivery”, Biomedical Microdevices, Vol. 24, 17,
2022. I. F. – 3.783.
(https://doi.org/10.1007/s10544-022-00618-y)
60. Sonu Singh, Priya Vashisth, Vijay Kumar Meena,
and Dinesh Kalyanasundaram,*
“Cellular studies and sustained drug delivery via nanostructures fabricated on
3D printed porous Neovius lattices of Ti6Al4V ELI”, Biomedical Materials, Vol.
17, 045004,
2022. I. F – 4.103.
(https://doi.org/10.1088/1748-605X/ac6922)
Nanoscale structures – Fabrication
of core-shell metallic Nanoparticles
59. Ujjwal Ranjan Dahiya, Sonu Singh, Chetan Kumar
Garg, Aakansha Rai, and Dinesh Kalyanasundaram,* “Modified surface
composition and bio-compatibility of core-shell nitinol nanoparticles
fabricated via laser ablation of differently passivized targets”, Frontiers in
Materials, Vol. 9, 855705, 2022. I. F. –
3.983.
(https://doi.org/10.3389/fmats.2022.855705)
58. Meenakshi
Verma, Abhishek Rana, K. E. Ch. Vidyasagar, Dinesh Kalyanasundaram,
Sampa Saha,* “Protein patterning on microtextured polymeric nano-brush
templates obtained by nanosecond fibre laser”, Macromolecular Bioscience, 2100454, 2022. I. F – 5.859.
(https://doi.org/10.1002/mabi.202100454)
Industrial Products – Coating and Tribological
studies
57. N. V. Abhijith, Deepak Kumar,* Dinesh
Kalyanasundaram, "Development of single stage TiNbMoMnFe high entropy
alloy coating on 304L stainless steel using HVOF thermal spray", Journal
of thermal spray technology, Vol. 31, pp. 1032-1044, 2022. I. F. - 2.839.
(https://doi.org/10.1007/s11666-021-01294-9)
56. Niharika Gupta,* Naresh Tandon, R. K. Pandey,
K. E. Ch. Vidyasagar, Dinesh Kalyanasundaram, “Effects of micro-texture
on the film formation and vibration behaviors of grease lubricated spur
gearset”, Tribology International, Vol. 165, 107247, 2022. I. F. – 5.620.
(https://doi.org/10.1016/j.triboint.2021.107247)
2021
55. Dilpreet Singh, Bhavuk Garg, Pulak Mohan Pandey
and Dinesh Kalyanasundaram,* “Design and development of 3D printing
assisted microwave sintering of elbow implant with biomechanical properties
similar to human elbow”, Rapid Prototyping Journal, Vol. 22, pp. 390-403, 2021.
I. F – 4.043.
(https://doi.org/10.1108/RPJ-05-2021-0116).
Composites – Controlled alignment
54. Jayaram Pothnis,* Dinesh Kalyanasundaram
and Suhasini Gururaja, “Mitigation
of notch sensitivity by controlled alignment of carbon nanotubes in epoxy using
electric field application”, Composites Part A: Applied Science and
Manufacturing, Vol. 149, 106544, 2021. I.
F. – 9.463.
(https://doi.org/10.1016/j.compositesa.2021.106544)
53. K. E. Ch.
Vidyasagar, R. K. Pandey and Dinesh Kalyanasundaram,* “An
investigation of snake-skin like textures on the performance of radial ball
bearings”, Journal of Bionic Engineering, Vol. 18, pp. 974-990, 2021. I. F.
– 2.995.
(https://doi.org/10.1007/s42235-021-0056-5)
Diagnostics –
COVID detection
52. Ujjwal Ranjan Dahiya, Guru Dutt Gupt, Rajendra Singh Dhaka,
and Dinesh Kalyanasundaram, “Functionalized Co2FeAl Nanoparticles
for Detection of SARS CoV‑2 based on Reverse Transcriptase Loop-Mediated
Isothermal Amplification”, ACS Applied Nano Materials, Vol. 4, pp. 5871-5782,
2021. I. F. – 6.140.
(https://doi.org/10.1021/acsanm.1c00782)
Implants –
Surface modification platform
51. K. E. Ch.
Vidyasagar, Varun Aggarwal, Sasanka Sekhar Sinha, Subir Kumar Saha, and Dinesh
Kalyanasundaram,* “Laser based micro texturing of freeform surfaces of
implants using a Stewart platform”, Precision Engineering, Vol. 72, pp.
294-303, 2021. I. F. – 3.315.
(https://doi.org/10.1016/j.precisioneng.2021.05.004)
Biomechanics -
Modeling
50. Arnab Sikidar, M. Marieswaran and Dinesh Kalyanasundaram,* “Estimation of
forces on anterior cruciate ligament in dynamic activities”, Biomechanics and
modeling in mechanobiology, Vol. 20, pp. 1533-1546, 2021. I. F – 3.623.
(https://doi.org/10.1007/s10237-021-01461-5)
49. K. E. Ch. Vidyasagar, R. K. Pandey, Dinesh
Kalyanasundaram,* “Effects of
microtextured inner raceways on the frictional and vibrational behaviour of
grease lubricated radial ball bearings”, Friction, Vol. 9, pp. 1749-1765, 2021.
I. F – 4.924.
(https://doi.org/10.1007/s40544-021-0495-3)
Composites - Manufacturing
48. V.
Balakumaran, Ramasamy Alagirusamy, Dinesh Kalyanasundaram,* “Epoxy based
sandwich composite using three-dimensional integrally woven fabric as core
strengthened with additional carbon face-sheets”, Journal of Mechanical
Behavior of Biomedical Materials, Vol. 116, 104317, 2021. I. F. – 4.042.
(https://doi.org/10.1016/j.jmbbm.2021.104317)
Nanoscale structures –
Fabrication and evaluation
47. Vinod Parmar, Sonu Singh, Sunil Kumar, G.
Vijaya Prakash, Dinesh Kalyanasundaram,*
“Thermo-physical modeling and experimental validation of core-shell
nanoparticle fabrication of nickel-titanium (nitinol) alloy”, Optics and Laser
Technology, Vol. 138, 106880, 2021. I. F – 4.939.
(https://doi.org/10.1016/j.optlastec.2020.106880)
Biomechanics -
Experimental
46. M. Marieswaran, Arnab Sikidar, Abhishek Rana, Dilpreet Singh, Nasim
Mansoori, Sanjeev Lalwani, Dinesh
Kalyanasundaram,* “A cadaveric study on the strain rate dependent behavior
of human anterior cruciate ligament”, Acta of Bioengineering and Biomechanics,
Vol. 23, pp. 45-57, 2021. I. F – 1.238.
(https://doi.org/10.37190/ABB-01672-2020-05)
Composites –
Manufacturing and evaluation
45. Jayaram Pothnis, Dinesh Kalyanasundaram*,
Suhasini Gururaja,* “Enhancement
of open hole tensile strength via alignment of carbon nanotubes infused in
glass fiber – epoxy – CNT multi-scale composites”, Composites Part A: Applied
Science and Manufacturing, Vol. 140, 106155, 2021. I. F. – 9.463.
(https://doi.org/10.1016/j.compositesa.2020.106155)
2020
44. Niharika Gupta,* Naresh Tandon, R. K. Pandey,
K. E. C. Vidyasagar, Dinesh Kalyanasundaram, “Tribological and Vibration
Studies of Textured Spur Gear Pairs Under Fully Flooded and Starved Lubricating
Conditions”, Tribology Transactions, Published online, 2020. I. F – 2.056.
(https://doi.org/10.1080/10402004.2020.1794093).
Implants – Surface
modification and Tribology
43. K. E. C. Vidyasagar, Abhishek Rana, and Dinesh Kalyanasundaram,* “Optimization of laser parameters for
improved corrosion resistance of Nitinol”, Materials and Manufacturing
processes, Vol. 35, pp. 1661-1669, 2020. I.
F – 4.783.
(https://doi.org/10.1080/10426914.2020.1784926).
Composites –
Manufacturing and evaluation
42. Jayaram Pothnis, Dinesh Kalyanasundaram* and, Suhasini Gururaja,* “Controlled
manipulation of CNTs in glass/epoxy composites with cut-outs using non-uniform electric
field”, Advanced Composite Materials, Published Online, 2020. I. F – 2.920.
(https://doi.org/10.1080/09243046.2020.1744220).
Implants – cytokine evaluation
41. Avinash Kaur, Om Prakash Kharbanda,* M. R. Rajeswari, and Dinesh Kalyanasundaram*, “Levels of
TGF-β1 in peri-miniscrew implant crevicular fluid”, Journal of Oral
Biology and Craniofacial research, Vol. 10, pp. 93-98, 2020.
(https://doi.org/10.1186/s40510-017-0195-8).
Composites – Manufacturing
and evaluation
40. Vijay Goud, Dilpreet Singh, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram,* “Investigation
of the mechanical performance of carbon/polypropylene 2D and 3D woven
composites manufactured through multi-step impregnation processes”, Composites
Part A: Applied Science and Manufacturing, Vol. 130, 105733, 2020. I. F. – 9.463.
(https://doi.org/10.1016/j.compositesa.2019.105733)
2019
Diagnostics – Salmonella
Detection
39. Avinash Kaur, Priyanka Sharma, Ankur Ruhela, Harshit Khariwal, Sagar
Seth, Adarsh Kumar, Ravikrishnan Elangovan, Arti Kapil, and Dinesh Kalyanasundaram,* “Simultaneous
and high sensitive detection of Salmonella typhi and Salmonella
paratyphi A in human clinical blood samples using an affordable and
portable device”, Biomedical Microdevices, Vol. 21, 95, 2019. I. F. – 3.783.
(https://doi.org/10.1007/s10544-019-0441-6).
Composites – Manufacturing
and evaluation
38. Vijay Goud, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram,* “Box-Behnken technique
based multi-parametric optimization of electrostatic spray coating in the
manufacturing of thermoplastic composites”, Materials and Manufacturing
processes, Vol. 34, pp. 1638-1645, 2019. I.
F – 4.783.
(https://doi.org/10.1080/10426914.2019.1666991).
Nanoscale structures –
Fabrication and evaluation
37. Adeeba Shakeel, Rohan Bhattacharya,
Sampathkumar Jeevanandham, Dakshi Kochhar, Aarti Singh, Lalita Mehra, Maryam
Ghufran, Piyush Garg, Sujata Sangam, Subhrajit Biswas, Amit Tyagi, Dinesh
Kalyanasundaram, Sandip Chakrabarti, and Monalisa Mukherjee,* “Graphene
Quantum Dots in the Game of Directing Polymer Self-assembly to Exotic Kagomé Lattice
and Janus Nanostructures”, ACS Nano, Vol. 13, pp. 9397-9407, 2019. I. F –
18.027.
(https://doi.org/10.1021/acsnano.9b04188)
Implants – Machining and
modeling
36. Vinod Parmar, Avinash Kumar, G. Vijaya Prakash,
Subhra Datta, and Dinesh Kalyanasundaram,*
“Investigation, modelling and validation of material separation mechanism
during fiber laser machining of medical grade titanium alloy Ti6Al4V and
stainless steel SS316L”, Mechanics of Materials, Vol. 137, 103125, 2019. I.
F – 4.137.
(https://doi.org/10.1016/j.mechmat.2019.103125)
Biomechanics -
Modeling
35. Arnab Sikidar and Dinesh Kalyanasundaram,* “An open-source plugin for OpenSim® to model
the non-linear behaviour of dense connective tissues of the human knee at
variable strain rates”, Computers in Biology and Medicine, Vol. 110, pp.
186-195, 2019. I. F – 6.698.
(https://doi.org/10.1016/j.compbiomed.2019.05.021)
Nanoscale structures –
Fabrication and evaluation
34. Vinod Parmar, Kandarp Changela, B. Srinivas,
Manimuthu Mani Sankar, Sujata Mohanty, S. K. Panigraphi, K. Hariharan and Dinesh Kalyanasundaram,* “Relationship
between Dislocation Density and Antibacterial Activity of Cryo-Rolled and
Cold-Rolled Copper”, Materials, Vol. 12, pp. 1-11, 2019. I. F – 3.748.
(https://doi.org/10.3390/ma12020200).
Nanoscale structures –
Fabrication and evaluation
33. Arvind Singh, Pranab K Mohapatra, Dinesh Kalyanasundaram, Sunil Kumar,*
“Self functionalized ultrastable water suspension of luminescent carbon quantum
dots”, Materials Chemistry and Physics, Vol. 225, pp. 23-27, 2019. I. F – 4.778.
(https://doi.org/10.1016/j.matchemphys.2018.12.031).
Composites – Manufacturing
and evaluation
32. Vijay Goud, Ramasamy Alagirusamy, Apurba Das and Dinesh Kalyanasundaram,* “Influence of
various forms of polypropylene matrix (fiber, powder and film states) on the
flexural strength of carbon-polypropylene composites”, Composites Part B:
Engineering, Vol. 166, pp. 56-64, 2019. I.
F. – 11.322.
(https://doi.org/10.1016/j.compositesb.2018.11.135)
Implants – Clinical evaluation of Surgical Guides
31. Bhavuk Garg,* Manish Gupta, Menaka Singh and Dinesh Kalyanasundaram, “Outcome and safety analysis of 3D printed
patient specific pedicle screw jigs for complex spinal deformities: A
comparative study”, The Spine Journal, Vol. 19, pp. 56-64, 2019. I. F – 4.297.
(https://doi.org/10.1016/j.spinee.2018.05.001).
Composites –
Manufacturing and evaluation
30. Jayaram Pothnis, Suhasini
Gururaja,* and Dinesh Kalyanasundaram, “Development and
characterization of electric field directed preferentially aligned CNT
nanocomposites”, Mechanics of Advanced Materials and Structures, Vol. 26, pp.
35-41, 2019. I. F – 3.338.
(https://doi.org/10.1080/15376494.2018.1534165).
Biomechanics -
Experimental
29. Dilpreet Singh, Abhishek Rana, Saroj Kaler
Jhajhria, Bhavuk Garg, Pulak Mohan Pandey, and Dinesh Kalyanasundaram,* “Experimental assessment of biomechanical
properties in human male elbow bone subjected to bending and compression
loads”, Journal of Applied Biomaterials & Functional Materials, Vol. 2, pp.
1-13, 2019. I. F – 2.744.
(http://journals.sagepub.com/doi/full/10.1177/2280800018793816)
2018
28. Dilpreet Singh, Pulak M Pandey, and Dinesh Kalyanasundaram,* “Optimization of pressureless microwave sintering
of Ti6Al4V by response surface methodology”, Materials and Manufacturing
processes, Vol. 33, pp. 1835-44, 2018. I.
F – 4.783.
(https://doi.org/10.1080/10426914.2018.1476765).
Composites – Fatigue testing
27. Dinesh Kalyanasundaram,*
Suhasini Gururaja, Prajakta Prabhune, and Dilpreet Singh “Open hole fatigue
testing of laser machined MD-CFRPs”, Composites Part A: Applied Science and
Manufacturing, Vol. 111, pp. 33-41, 2018. I.
F – 9.463.
(https://doi.org/10.1016/j.compositesa.2018.05.005).
Diagnostics – Salmonella
Detection
26. Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan, Sandeep Jha and Dinesh Kalyanasundaram,*
“Highly-sensitive detection of Salmonella typhi in clinical blood samples by
magnetic nanoparticle based enrichment and in-situ measurement of isothermal
amplification of nucleic acids”, PLoS One, Vol. 13, Article no. e0194817, pp.
1-14, 2018. I. F. – 3.752.
(https://doi.org/10.1371/journal.pone.0194817).
Biomechanics -
Modeling
25. M. Marieswaran, Arnab Sikidar, Anu Goel, Deepak Joshi and Dinesh Kalyanasundaram,* “An extended
OpenSim knee model for analysis of strains of connective tissues”, Biomedical
Engineering Online, Vol. 17, Article no. 17:42, pp. 1-13, 2018. I. F. – 3.903.
(https://doi.org/10.1186/s12938-018-0474-8).
Implants – Surface modification
24. Vinod Parmar, Avinash Kumar, Manimuthu Mani Sankar, Subhra Datta, G.
Vijaya Prakash, Sujata Mohanty* and Dinesh
Kalyanasundaram,* “Oxidation facilitated antimicrobial ability of laser
micro-textured titanium alloy against gram-positive staphylococcus aureus for
biomedical applications”, Journal of laser applications, Vol. 30, Article no.
032001, pp. 1-10, 2018. I. F – 2.521.
(https://doi.org/10.2351/1.5039860).
Biomechanics -
Modeling
23. Ashutosh Bijalwan, Badri Prasad Patel,* M. Marieswaran and Dinesh Kalyanasundaram, “Volumetric
locking free 3D finite element for modelling of anisotropic visco-hyperelastic
behaviour of Anterior Cruciate Ligament”, Journal of Biomechanics, Vol. 73, pp.
1-8, 2018. I. F. – 2.789.
(https://doi.org/10.1016/j.jbiomech.2018.03.016).
Prosthesis – Design and development
22. Srinivas Pandit, Anoop Kant Godiyal, Amit Kumar Vimal, Upinderpal
Singh, Deepak Joshi,* and Dinesh
Kalyanasundaram, “An affordable insole-sensor based trans-femoral
prosthesis for normal gait”, Sensors, Vol. 18, pp. 706, 2018. I. F. – 3.847.
(https://doi.org/10.3390/s18030706).
Diagnostics – Salmonella
Detection
21. Avinash Kaur, Ritu Das, Mayank Rai Nigam, Ravikrishnan Elangovan,
Deepal Pandya, Sandeep Jha* and Dinesh
Kalyanasundaram,* “Rapid detection device for Salmonella typhi in milk,
fruit juice, tap water and calf serum”, Indian Journal of Microbiology, Vol.
58, pp. 381-392, 2018. I. F. – 2.461.
(https://doi.org/10.1007/s12088-018-0730-4).
Composites – Manufacturing
and evaluation
20. Vijay Goud, Ramasamy Alagirusamy, Apurba Das* and Dinesh Kalyanasundaram, “Dry Electrostatic
Spray Coated Towpregs for Thermoplastic Composites”, Fibers and Polymers, Vol.
19, pp. 364-374, 2018. I. F. – 2.347.
(https://doi.org/10.1007/s12221-018-7470-7).
Biomechanics -
Experimental
19. M. Marieswaran, Ishita Jain, Bhavuk Garg, Vijay Sharma and Dinesh Kalyanasundaram,* “A review on
biomechanics of anterior cruciate ligament and materials for reconstruction”,
Applied Bionics and Biomechanics, Vol. 2018, pp. 1-14, 2018. I. F. – 1.664.
(https://doi.org/10.1155/2018/4657824).
Implants – Surface modification and modeling
18. Avinash Kumar, Subhra Datta,* and Dinesh Kalyanasundaram, “Liquid slippage in confined flows: Effect
of periodic micropatterns of arbitrary pitch and amplitude”, ASME Journal of
Heat Transfer, Vol. 140, Article no. 012403, pp. 1-7, 2018. I. F. – 1.855.
(https://doi.org/10.1115/1.4037363).
Implants - Manufacturing
17. Dilpreet Singh, Abhishek Rana, Pawan Sharma,
Pulak Mohan Pandey, Dinesh
Kalyanasundaram,* “Microwave sintering of Ti6Al4V: Optimization of
processing parameters for maximal tensile strength and minimal pore size”,
Metals, Vol. 8, pp. 1-15, 2018. I. F –
2.695.
(https://doi.org/10.3390/met8121086).
Biomechanics -
Experimental
16. M. Marieswaran, Nasim Mansoori, Vijay Kumar Digge, Saroj Kaler
Jhajhria, Chittaranjan Behera, Sanjeev Lalwani, and Dinesh Kalyanasundaram,* “Effect of preservation methods on tensile
properties of human femur-ACL-tibial complex (FATC) – A cadaveric study on male
subjects”, Acta of Bioengineering and Biomechanics, Vol. 20, pp. 31-42, 2018. I. F. – 1.238.
(https://doi.org/10.5277/ABB-01134-2018-03).
2017 and
earlier
Implants – Cytokine secretion
15. Avinash Kaur, Om Prakash Kharbanda,* Priyanka Kapoor, and Dinesh Kalyanasundaram, “A review of
biomarkers in peri-miniscrew implant crevicular fluid (PMICF)”, Progress in
orthodontics, Vol. 18, Article no. 18:42, pp. 1-8, 2017. I. F. – 3.247.
(https://doi.org/10.1186/s40510-017-0195-8).
Composites – Manufacturing
and evaluation
14. Hemant Chouhan,$ Dilpreet Singh,$ Vinod
Parmar, Dinesh Kalyanasundaram,*
Naresh Bhatnagar, “Laser machining of Kevlar fiber reinforced laminates–Effect
of polyetherimide versus polypropylene matrix”, Composites Science and
Technology, Vol. 134, pp. 267-274, 2016. I.
F – 9.987.
(https://doi.org/10.1016/j.compscitech.2016.08.026).
Implants – Surface modification and modeling
13. Avinash Kumar, Subhra Datta,* and Dinesh Kalyanasundaram,
“Permeability and effective slip in confined flows transverse to wall slippage
patterns”, Physics of fluids, Vol. 28, Article no. 082002, pp. 1-19, 2016. I. F – 4.980.
(https://doi.org/10.1063/1.4959184).
Composites – Manufacturing and evaluation
12. Akshay Hejjaji,$ Dilpreet Singh,$ Sagar
Kubher, Dinesh Kalyanasundaram,* and
Suhasini Gururaja,* “Machining damage in FRPs: Laser versus conventional
drilling”, Composites Part A: Applied Science and Manufacturing, Vol. 82, pp.
42-52, 2016. I. F – 9.463.
(https://doi.org/10.1016/j.compositesa.2015.11.036).
Implants – Surface modification and evaluation
11. Pradnya Patil, Om Prakash Kharbanda,* Ritu Duggal, Taposh K Das, Dinesh Kalyanasundaram, “Surface
deterioration and elemental composition of retrieved orthodontic miniscrews”,
American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 147 (4), pp.
S88-S100, 2015. I.F – 2.711.
(https://doi.org/10.1016/j.ajodo.2014.10.034).
Industrial Products - Laser machining and modeling
10. Dinesh Kalyanasundaram,
Andrea Schmidt, Pranav Shrotriya*, and Pal Molian, “Hybrid CO2
Laser/Waterjet Machining of Polycrystalline Diamond Substrate: Material
Separation Through Transformation Induced Controlled Fracture”, ASME Journal of
Manufacturing Science and Engineering, Vol. 136, Article no. 041001, pp. 1-10,
2014. I.F – 3.033.
(https://doi.org/10.1115/1.4027304).
Diagnostics – DNA preparation using Electrophoresis
9. Dinesh Kalyanasundaram,
Jong-Hoon Kim, Gareth Fotouhi, Hyun-Boo Lee, Morgan Hiraiwa, Kieseok Oh,
Kyong-Hoon Lee, Jae-Hyun Chung,* “Nanotips for single-step preparation of DNA
for qPCR analysis”, Analyst, Vol. 138, pp. 3135-3138, 2013. I.F – 5.227.
(https://doi.org/10.1039/C3AN00170A).
Diagnostics – DNA preparation using Electrophoresis
8. Dinesh Kalyanasundaram,
Jong-Hoon Kim, Woon-Hong Yeo, Kieseok Oh, Kyong-Hoon Lee, M-H Kim, S-M Ryew,
S-G Ahn, Dayong Gao, Gerard A Cangelosi, Jae-Hyun Chung,* “Rapid extraction and
preservation of genomic DNA from human samples”, Analytical and bioanalytical
chemistry, Vol. 405 (6), pp. 1977-1983, 2012. I.F – 4.478.
(https://doi.org/10.1007/s00216-012-6637-8).
Diagnostics – DNA preparation using Electrophoresis
7. Dinesh Kalyanasundaram,
Shinnosuke Inoue, Jong-Hoon Kim, Hyun-Boo Lee, Zenko Kawabata, Woon-Hong Yeo,
Gerard A Cangelosi, Kieseok Oh, Dayong Gao, Kyong-Hoon Lee, Jae-Hyun Chung,*
“Electric-field induced concentration and capture of DNA onto microtips”,
Microfluidics and nanofluidics, Vol. 13 (2), pp. 217-225, 2012. I.F – 3.090.
(https://doi.org/10.1007/s10404-012-0956-0).
Diagnostics – Tuberculosis
6. Joon-hong Kim, Woon-Hong Yeo, Zhiquan Shu, Shinnouske Innuoe, Dinesh Kalyanasundaram, John Ludwig,
Clement E Furlong, James J Riley, Kris M Weigel, Gerard A Cangelosi, Kieseok
Oh, Kyong-Hoon Lee, Dayong Gao, Jae-Hyun Chung,* “Immunosensor towards
low-cost, rapid diagnosis of tuberculosis”, Lab on a Chip, Vol. 12 (8), pp.
1437-1440, 2012. I.F – 7.517.
(https://doi.org/10.1039/C2LC21131A).
Industrial Products - Laser machining and modeling
5. Dinesh Kalyanasundaram,
Pal Molian and Pranav Shrotriya,* “Application of chemical transformation
induced fracture for cutting of superhard materials”, Journal of Manufacturing
Processes, Vol. 14(3), pp. 336-342, 2012. I.F
– 5.684.
(https://doi.org/10.1016/j.jmapro.2011.11.004).
Industrial Products - Laser machining and modeling
4. Dinesh Kalyanasundaram,*
Pranav Shrotriya, and Pal Molian, “Fracture mechanics based hybrid laser/waterjet
machining of Zirconia (Y-PSZ)”, International Journal of Machine Tools &
Manufacture, Vol. 50, pp. 97-105, 2010. I.F
– 10.331.
(https://doi.org/10.1016/j.ijmachtools.
2009. 09.002).
Industrial Products - Laser machining and modeling
3. Dinesh Kalyanasundaram,*
Pranav Shrotriya, and Pal Molian, “Obtaining a Relationship Between Process
Parameters and Fracture Characteristics for Hybrid CO2 Laser∕Waterjet
Machining of Ceramics” – ASME Journal of Engineering Materials and Technology,
Vol. 131, Article no. 011005, pp. 1-10, 2008. I.F – 1.626.
(https://doi.org/10.1115/1.3026547).
Industrial Products - Laser machining and modeling
2. Dinesh Kalyanasundaram,*
Gamal Shehata, Clayton Neumann, Pranav Shrotriya, and Pal Molian, “Design and
validation of a hybrid laser/water-jet machining system for brittle materials”,
Journal of Laser Applications, Vol. 20, pp. 127-134, 2008. I.F – 1.636.
(https://doi.org/10.2351/1.2900554).
Industrial Products – Coating using Electrophoresis
1. Dinesh Kalyanasundaram* and Pal Molian,
“Electrodeposition of nanodiamond particles on aluminium alloy A319 for
improved tribological properties”, Micro & Nano letters, Vol. 3, pp.
110-116, 2008. I.F – 0.980.
Conference Proceedings:
16. Rohan Chawla, Dinesh Kalyanasundaram, Laxmi
Moksha, Jayanta Bhattacharyya, Anjali Phour, Thirumurthy Velpandian, Seema
Kashyap, “A novel, minimally invasive implant for intraocular drug delivery”,
Investigative ophthalmology and visual science, Denver, USA, 2022.
15. Pragya Tyagi, Kapil Sikka, Amit Chirom Singh, and Dinesh
Kalyanasundaram, “Effect of Earmuff on Distortion Product Otoacoustic
emissions in the presence of Noise”, “Indian Speech & Hearing Association
Conference, New Delhi, India, 2022.
14. V. Balakumaran, Kapil Sikka, Amit Chirom Singh,
Nils Heitmann, Thomas Rosner, Samarjit Chakraborty and Dinesh Kalyanasundaram, “Three-dimensional study of Steady State
Sound Pressure of Ear Canal using Finite Elemental Analysis”, 8th
World Congress of Biomechanics, Dublin, Ireland, 2018.
13. Arnab Sikidar, Deepak Joshi and Dinesh Kalyanasundaram, “An updated
OpenSim Knee Model for strain analysis of connective tissues”, 8th
World Congress of Biomechanics, Dublin, Ireland, 2018.
12. Jayaram Pothnis, Dinesh Kalyanasundaram, and Suhasini Gururaja, “Machining damage in
FRPs”, 18th European Conference on Composite Materials, Athens, Greece, 2018.
11. Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan,
Sandeep Jha and Dinesh Kalyanasundaram,
“Rapid detection of pathogen in point-of-care setup”, 28th
Anniversary World Congress on Biosensors, Miami, FL, USA, 2018.
10. Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Reduction of hydraulic friction in
confined flows by laser texturing: Experiments and theoretical validation”,
ASME 2018 16th International Conference on Nanochannels, Microchannels and
Minichannels, Dubrovnik, Croatia, 2018.
9. Avinash Kaur, Om Prakash Kharbanda, M. R.
Rajeswari, and Dinesh Kalyanasundaram, “Study of HMGB1, TGF-β1 levels and pH Value
In PMICF”, 96th General Session and Exhibition of the International
Association for Dental Research, London, UK, 2018.
8. Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Confinement effects on effective slip of
patterned surfaces", Fluids Engineering Division Summer Meeting, Hawaii,
USA, 2017.
7. Avinash Kaur, Arti Kapil, Ravikrishnan Elangovan,
Sandeep Jha and Dinesh Kalyanasundaram,
“Highly-sensitive detection of Salmonella typhi in human blood using a portable
optical system for detection of nucleic acids amplification”, Healthcare
Innovations and Point of Care Technologies, Bethasda, MD, USA, 2017.
6. Vinod Parmar, G Vijaya Prakash, Dinesh Kalyanasundaram, “Fabrication of
Anti-reflective Microstructured Silicon Surfaces Using Nanosecond Fiber Laser
Texturing”, Optical Nanostructures and Advanced Materials for Photovoltaics,
Boulder, CO, USA, 2017.
5. Avinash Kumar, Subhra Datta, Dinesh Kalyanasundaram, “Liquid Slippage in Confined Flows: Effect
of Periodic Micropatterns of Arbitrary Pitch and Amplitude”, ASME 2016 5th
International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis,
Singapore, 2016.
4. Joon-hong Kim, Woon-Hong Yeo, Zhiquan Shu, Scott
Soelberg, Shinnouske Innuoe, Dinesh
Kalyanasundaram et al, “Highly sensitive and specific
microtip-immunofluorescence sensor for rapid TB diagnosis”, μTAS 2011.
3.
Dinesh Kalyanasundaram, Pranav Shrotriya and Pal Molian, “Application of Chemical
Transformation induced Fracture for Cutting of Superhard Materials”, North
American Manufacturing Research Institute Conference, Society of Manufacturing
Engineers, Volume 39, May 2011.
2. Rodger Blum, Dinesh
Kalyanasundaram, Rajeev Nair, and Pal Molian, “Nano-diamond coating of
aluminum by laser-sintering techniques” Proceedings of the 2008 Nanotechnology
Conference and Trade Show, Volume 1, pg: 470-474, CRC Press, June 2008.
1. Dinesh
Kalyanasundaram, Pranav
Shrotriya, and Pal Molian, “CO2 Laser/Waterjet machining of
Polycrystalline Cubic Boron Nitride” – North American Manufacturing Research
Institute Conference, Society of Manufacturing Engineers, Volume 36, pg:
517-524, May 2008. Featured in July 2008 issue of Manufacturing Magazine.