Khawar, O., Baig. M. F. and Sanghi, S, 2020, Taylor-Couette flows subject to radial temperature gradient" , International Conference on Advances in Chemical and Petroleum Engineering ACAPE 2020, February 22-24, 2020, Aligarh Muslim University, Aligarh, India
Khan, H.H., Anwer, S. F., Sanghi, S. and Hasan, N., 2019" Comparison of minimal, marginal and fully turbulent flow in a square duct", 46th National Conference on Fluid Mechanics and Fluid Power (FMFP 2019), PSG College of Technology, Coimbatore
Khan, H.H., Anwer, S. F., Sanghi, S. and Hasan, N., 2019, "Proper orthogonal decomposition of turbulent flow in a straight square duct", Proc. 16th Asian Cong. of Fluid Mechanics, JNCASR Bengaluru, Lecture Notes in Mechanical Engineering, Springer.
S. Tanweer, A. Dewan and S. Sanghi, 2019, Influence of Buoyancy on Flow Past a Circular Cylinder Near a Moving Wall, Proc. 16th Asian Cong. of Fluid Mechanics, JNCASR Bengaluru, Lecture Notes in Mechanical Engineering, Springer.
Kumar N., Arora, N., Gupta, A. and Sanghi, S, 2018, A Numerical Framework For Linear Stability Analysis Of Two Dimensional Steady Flows, Fifth International Conference on Computational Methods for Thermal Problems, ThermaComp2018, July 9-11, 2018, Indian Institute of Science, Bangalore, INDIA, N. Massarotti, P. Nithiarasu, Pradip Dutta and C. Ranganyakalu (Eds.)
Obaidullah Khawar, M.F.Baig and Sanjeev Sanghi, 2018, Effect of thermal stratification on turbulent Taylor-Couette flows in horizontal configuration", Proceedings of the 7th international and 45th National conference on Fluid Mechanics and Fluid Power (FMFP) December 10-12, 2018, IIT Bombay, Mumbai, India.
S. Tanweer, A. Dewan, and S. Sanghi, 2018, Flow Past a Square Cylinder Near a Wall in the Absence of Wall Boundary-Layer, Proc. 7th Int. and 45th National Fluid Mechanics and Fluid Power (FMFP) Conf., IIT Bombay, Mumbai.
Khan, H.H., Anwer, S. F., Sanghi, S. and Hasan, N., 2017, Direct Numerical Simulation of Marginally Turbulent Flow in A Square Duct, ASCH& 2017, 6th Asian Symposium on Computational Heat Transfer and Fluid Flow, 10-13 December 2017, IIT Madras, Chennai, India.
Shishodia B.S., Sanghi S., Mahajan P. (2017) Redesigning of Motorcycle Helmet for Improved Air Ventilation Using Numerical Simulations. In: Saha A., Das D., Srivastava R., Panigrahi P., Muralidhar K. (eds) Fluid Mechanics and Fluid Power – Contemporary Research. Lecture Notes in Mechanical Engineering. Springer, New Delhi.
S. Tanweer, A. Dewan and S. Sanghi, 2017, Computational Study of Mixed Convection Past a Heated Square Cylinder Placed Near a Moving Wall, Proc. 24th National and 2nd Int. ISHMT-ASTFE Heat and Mass Transfer Conf., BITS Pilani, Hyderabad.
Yahya S.M., Anwer S.F., S. Sanghi, N. Hasan (2017) Peculiar Behavior of Thermally Stratified Channel Flow Under Non-Boussinesq Condition. In: Saha A., Das D., Srivastava R., Panigrahi P., Muralidhar K. (eds) Fluid Mechanics and Fluid Power – Contemporary Research. Lecture Notes in Mechanical Engineering. Springer, New Delhi
Khan, H.H., Siddiqua, M.J., Anwer, S.F. and Sanghi, S., 2016, Effect of Aspect ration on Flow Reversals in Rayleigh-Benrd Convection, FMfP2016-498,December 15-17, 2016, MNNITA, ALLAHABAD, UP, India.
Pagalthivarthi, K. V., Gupta, P. K.Ravichandra, J. S., Sanghi, S., 2015, “Neural Network Prediction of Erosion Wear in Pipeline Transporting Multisize Particulate Slurry,” International Conference on Paradigm Shift in Management & Technology 2015, YMCAUST, Faridabad, India, April 9-10, 2015.
S. M. Yahya, S. F. Anwer, and S. Sanghi,”Drifting of internal gravity wave in a non-Boussinesq stably stratified turbulent channel flow”, IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Goa, India, 15-18 December, 2014.
S. M. Yahya, S. F. Anwer, and S. Sanghi,”Augmentation of heat transfer and turbulence for better performance of photovoltaic panel”,at Chemical Technologies and Chemical Engineering Conference CHEMTECH- 2014, Istanbul, Turkey, 23– 25 October, 2014.
Arora, N., Jain, A., Singh A.,Gupta, A., Sanghi, S., Aono, H. and Shyy W., 2014, Forward propulsion of a rigid plunging aerofoil,32nd AIAA Applied Aerodynamics Conference, Atlanta, GA, USA, June 2014 (ldoi: 10.2514/6.2014-2150).
Sanghi, S. and Hasan, N, 2013, The Proper Orthogonal Decomposition and its Applications. In Topical Problems in Theoretical and Applied Mechanics, An Indo-Russian Workshop, IIT Madras, November 11-15, 2013, pp. 85-101.
Sanghi, S. and Hasan, N, 2013, Applications of the Proper Orthogonal Decomposition. 14th Asian Congress of Fluid Mechanics, Hanoi, Vietnam, October 14-19, 2013.
S. F. Anwer , S. M. Yahya, and S. Sanghi, 2013, Modulation in turbulence at high Richardsonnumber in an an isothermal channel flow. Book of Abstract Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, USA, 12-14 June, 2013.
S. M. Yahya, S. F. Anwer, and S. Sanghi,”On the role of variable viscosity and its effects on kinetic energy budget and structures in a turbulent channel flow”10th HSTAM International Congress on Mechanics, Chania, Crete, Greece, 25 – 27 May, 2013.
S. M. Yahya, S. F. Anwer, and S. Sanghi, 2013,Effect of Large Temperature Gradient on Turbulent Channel Flow, 2nd National Conference on Advances in Heat Transfer and Fluid Dynamics, Aligarh Muslim University, March 23-24, 2013.
Shishodia, B. S., Sanghi, S. and Mahajan, P., 2013, A Comparative Study of Turbulence Models Performance for the Study of Air Flow in Helmets, 1st International Conference on Helmet Performance and Design, Imperial College, London,UK, 15 February 2013, HPD-2013-8.
Anwer, SF, Khan, H.N, Sanghi, S., Ahmad, A. and Yahya, SM, 2012, Extension of SMAC scheme for variable density flows under strong temperature gradient. AIP Conference Proceedings 1440, 683.
S. M. Yahya, S. F. Anwer, and S. Sanghi, 2012, Numerical investigation of turbulent flow and heat transfer in high temperature solar receiver.Proceeding of 57th congress of ISTAM (An International meet) DIAT Pune,18-20 Dec-2012.
Deshpande, V., Eshpuniyani, B. and Sanghi, S. 2011, “Prediction of aerodynamic forces of flap of finite width using 2d ramp results - a case study”, 38th National conference on Fluid Mechanics and Fluid Power, 15-17 Dec 11, MANIT, Bhopal.
Sanghi S., 2011, Application of Proper Orthogonal Decomposition in Fluid Mechanics and Heat Transfer Problems, Proceedings of ICMAAE 2011, Kula Lumpur, Malaysia, 17-19 May 2011.
Deshpande, V., Eshpuniyani, B. and Sanghi, S., 2010, Computational study of supersonic flow over a flat plate with moving protrusion. Proceedings of 37th International and 4th National Conference of Fluid Mechanics and Fluid Power, December 16-18, 2010, IIT Madras, Chennai, India, FMFP10-HS-01.
Qamar, A., Khan, R.A., and Sanghi, S., 2007, Numerical investigation of vortex induced vibrations around a square cylinder. 4th MIT conference on Computational Fluid and Solid Mechanics, 13-15 June 2007, Boston, USA, CD.
Qamar, A., Hasan, N., and Sanghi, S., 2007, Effect of Axisymmetric Protuberance Mounted on the Cylindrical Nosed Body at Supersonic Speed. 25th AIAA Applied Aerodynamic Conference, 25-28 June 2007, Miami, USA.
Qamar, A., Hasan. N and Sanghi, S., 2007, Flow induced thermal mixing of two dimensional laminar counterflowing jets in a channel. 39th AIAA Themophysics Conference, 25-28 June 2007, Miami, USA.
S. Anwer, S.Sanghi, N. Hasan And S. Mukherjee, 2007, A Numerical Study of Pitching Amplitude on the Flow Induced by Translating, Plunging and Pitching Airfoil. 25th AIAA Applied Aerodynamic Conference, 25-28 June 2007, Miami, USA.
Sanghi, S. and Anwar, S.F., 2007, Optimal frequency and force generation in plunging elliptical aerofoil, 1st international Aerospace CFD conference (IACC), Paris 2007.
Qamar, A., Hasan, N., and Sanghi, S., 2006, Higher Order Extension of the Particle Velocity Upwinding Scheme for the Hyperbolic Conservation Laws. International congress on COMPUTATIONAL MECHANICS AND SIMULATION (ICCMS 06), 22- 24December IIT Guwahati India.
Sanghi, S. and Hasan, N., 2007, The Application of Proper Orthogonal Decomposition in Fluid Mechanics and Heat Transfer Problems. Indo Australian workshop and symposium on IAWS-CFD 2007, 12-14 April 2007, IIT Roorkee, CD.
S. Sanghi, S.Bhaskar, D. Mohan, G. Tiwari and A. Mudgal, 2006, Assessment of Air Quality in Delhi. BAQ 2006, Yogyakarta, Indonesia, 13-16 December 2006, (poster).
Sanghi, S., Hasan, N., 2006, Proper Orthogonal Decomposition and its Applications. Proceedings of the National Conference on Advances in Heat Transfer and Fluid Dynamics, Keynote Lecture, Dept. of mechanical Engineering, Z. H. College of Engg. And Technology, Aligarh Muslim University, Aligarh, 16-17 September 2006, pp. 35-45.
Sanghi, S., Mahajan, P., Pinnojee, P.K., Jain, S. and Yadav P., 2006, Analysis of air flow inside the helmet, Proceedings of 8th World Conference on Injury prevention and Safety Promotion, Durban, South Africa, 2-5 April 2006, CD paper no. 994.
Anwar, S.F., Hasan, N., Sanghi, S. and Mukherjee, S., 2006 Force generation and optimal frequency selection of an elliptic foil. Proceedings of the 11th Asian Congress of Fluid Mechanics, 22-25 May 2006, Kuala Lumpur, Malaysia.
Qamar, A., Hasan, N. and Sanghi, S., 2006, Supersonic flow past the axisymmetic triangular obstacle mounted on a cylindrical body of revolution using a new scheme. Proceedings of the 11th Asian Congress of Fluid Mechanics, 22-25 May 2006, Kuala Lumpur, Malaysia.
K.V. Pagalthivarthi, J. S. Ravichandra, S. Sanghi, and P. K. Gupta, 2005, “Two Strategies in Multi-size Particulate Flow Computations,” Paper No. 289, 5th International Symposium on Multiphase Flow, Heat and Mass Transfer and Energy Conversion, China, July 3-5, 2005.
Qamar, A., Hasan, N. and Sanghi, S., 2005, Numerical computation of surface mounted obstacle in supersonic flows using a new particle velocity upwinding scheme, 23rd AIAA Applied Aerodynamics Conference, 6-9 June 2005, Toronto, Canada, AIAA 2005-4722.
Hasan, N. and Sanghi, S., 2005Heat transfer characteristics of thermally driven convection in a horizontal rotating cylinder, 38th AIAA Thermophysics Conference, 6-9 June 2005, Toronto, Canada, AIAA 2005-4826.
Anwer, S. F., Hasan, N. and Sanghi, S., 2004. Study of flow past a square cylinder using a new computational approach at the outflow boundary. 31st National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, 16-18 December, 2004, pp. 269-277.
Qamar,A., Hasan, N. and Sanghi, S., 2004. A new flux based predictor-corrector particle velocity upwinding (PVU) scheme for the computation of compressible flows. 31st National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, 16-18 December, 2004, pp. 259-268.
Hasan, N., Anwar, S.F. and Sanghi, S., 2004. On the outflow boundary condition for external incompressible flows: A new approach. 7th annual CFD symposium, CFD division of Aeronautical Society of India, Bangalore, 11-12 August 2004.
Pagalthivarthi, K. V., Ravichandra, J.S. & Sanghi, S. 2004. Numerical prediction of multi-size particulate flow in a horizontal channel. 5th International Conference on Multiphase flow, ICMF-2004, Yokohama, Japan, May 2004.
Qamar, A., Hasan, N. and Sanghi, S. 2004. Complete Navier-Stokes solution for supersonic laminar flow past a forward facing step. 2nd BSME-ASME International Conf. on Thermal Engng., 2-4 Jan 2004, Dhaka, pp.691-696.
Anwer, S. F., Sanghi, S. and Hasan, N., 2004. Generation of curvilinear body fitted grids in two space dimensions using an efficient nine point Strongly Implicit Procedure based scheme. 2nd BSME-ASME International Conf. on Thermal Engng., 2-4 Jan 2004, Dhaka, pp.633-638.
Hasan, N. and Sanghi, S., 2004. Natural convection in a horizontal rotating circular cylinder. 2nd BSME-ASME International Conf. on Thermal Engng., 2-4 Jan 2004, Dhaka, pp.125-134.
Pagalthivarthi, K.V., Ravichandra, J.S. and Sanghi, S., 2004. Determination of equivalent particle size in multi-size particulate pipe flow. 2nd BSME-ASME International Conf. on Thermal Engng., 2-4 Jan 2004, Dhaka, pp.496-501.
Sanghi, S., Mohan, D. and Vajpayee, N. 2003. Assessment of air quality in Delhi after the changeover to CNG buses, BAQ 2003, Manila, Philippines CD-ROM.
Jain, R., Sanghi S. & Krishnan, P.V., 2003. FEM computation of dispersed 2-phase turbulent flow in a vertical pipe. Proceedings of the 6th annual CFD symposium, CFD division of AeSI, Bangalore (India), Aug. 2003, CP23 pp1-5.
Ravichandra, J. S., Pagalthivarthi, K.V., and Sanghi, S., 2003. Pressure Drop Prediction in Pipeline Transportation of Multi-size Particles Using Neural Networks. International Conf. on CAD, CAM, Robotic and Autonomous Factories, New Delhi, 11-13 Aug, 2003.
Mukherjee, S. and Sanghi, S., 2003. Design of a six link mechanism for a micro air vehicle, National symposium on Mechanisms and Design , Bangalore ,July 25,2003.
Pagalthivarthi, K.V., Ravichandra, J. S., and Sanghi, S., 2003. Numerical study of particulate impact wear in horizontal pipe flow. Plasticity and Impact Mechanics: Proceedings of 8th international symposium Implast 2003, I.I.T. Delhi, pp.972-978.
Sanghi, S., 2002. Air quality impact assessment due to CNG buses in Delhi. Better Air Quality 2002- Regional workshop on Better Air Quality in Asian and Pacific Rim Cities: Hong Kong December 2002. CD-ROM.
Hasan, N. and Sanghi, S., 2002. Effect of rotation on buoyancy induced two dimensional fluid motion in a horizontal circular cylinder. 2nd international and 29th national conference on Fluid Mechanics and Fluid Power, I.I.T. Roorkee, pp. 864-874.
Ravichandra, J. S., Pagalthivarthi, K.V., and Sanghi, S., 2002. Multi-size particulate flow in horizontal pipe: Numerical prediction and validation. 2nd international and 29th national conference on Fluid Mechanics and Fluid Power, I.I.T. Roorkee, pp. 699-704.
Sridhar, P. S. V. S., Pagalthivarthi, K.V., and Sanghi, S., 2002. Simulation of particle impact with a wedge in dilute two-phase flows. Symposium on Large Scale deformations, I.I.T. Delhi, 2002.
Sanghi, S., 2001. Modelling of turbulent flows. Proceedings of Workshop on CFD, Aerospace Engineering department, I.I.T. Kharagpur, pp. 258-268.
Gupta, A., Mukherjee, S. and Sanghi, S.. 2001. Design of a six link mechanism for a micro air vehicle. Proceedings of NACOMM-2001, December 2001,IIT Kharagpur.
Puri, J.S., Singh, S.N., Seshadri, V. & Sanghi, S., 2001. Performance of an adjustable orificemeter with conical body. Proceedings of the 12th ISME Conference, Chennai (India), Jan. 2001.
Jain, R., Krishnan, P.V. & Sanghi, S., 2000. FEM formulation for dispersed 2-phase turbulent flows. Proceedings of the 27th National FMFP Conference, Palghat (India), Dec. 2000, pp. 332-337.
Puri, J.S., Singh, S.N., Seshadri, V. & Sanghi, S., 2000. Feasibility of designing an adjustable annular orifice using CFD. Proceedings of the 27th National FMFP Conference, Palghat (India), Dec. 2000, pp. 286-291.
Sanghi, S. & Majumdar, P.S., 1999. Chaos in a system of two beads mounted on a rotating hoop. Dynamics Days Asia Pacific: 1st International Conference on Nonlinear Science, HKBU, Hong Kong, P 3-4.
Sanghi, S. & Lumley, J. L., 1998. Inclusion of particles in the modelling of atmospheric turbulence. Proceedings of International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, Dec. 1998, CD ROM.
Sanghi, S. & Sharma, P., 1998. Near wall explicit algebraic stress models. Proceedings of 25th National and 1st International Conference on Fluid Mechanics and Fluid Power, I.I.T. Delhi, Dec. 1998, pp. 861-867.
Kumar, V. & Sanghi, S., 1997. Virtual laboratory modules: an effective supplement to enhance laboratory instruction. Proceedings of 18th ICDE World Conference, Penn. State University, June 1997, CD ROM.
Sanghi, S., 1993. Expansion of vorticity in proper orthogonal decomposition modes. 37th ISTAM National Congress, Abstracts of Papers, pp.71.
Sanghi, S. & Aubry N., 1991. Heteroclinic connections in near-wall turbulence. Dynamics Days, Houston, January 6-9, 1991.
Sanghi, S. and Aubry, N., 1990. Kinematics and dynamics of near-wall turbulence. APS annual meeting, Division of fluid dynamics, Cornell University, November 18-20, 1990, paper No. DA 6.
Sanghi, S. and Aubry, N., 1989. Persistence of strain, streaks and bursts in the turbulent wall layer. APS annual meeting, Division of fluid dynamics, NASA Ames Research Center, November 19-21, 1989, Paper No. HC 1.
Aubry, N. and Sanghi, S., 1989. Persitency of intermittency in low dimensional models of the turbulent wall layer. APS annual meeting, Division of fluid dynamics, NASA Ames Research Center, November 19-21, 1989, Paper No. EG 4.
Aubry, N. and Sanghi, S., 1989. Action of streamwise scales on the dynamics of the turbulent wall layer. 1989 annual AIChE meeting, San Francisco, November 5-10, 1989.