1. Development of an automated Security System for vehicle entry - exit control consisting of vehicle authorization system and under carriage vehicle inspection system, Department of information Technology, R&D Division, Rs 162.5 lacs, (other consultants - Prof M Balakrishnan, Prof S Bannerjee, Prof DT Sahani, Dr S Mukherjee)
   
   
2. Safety modeling and epidimeological research, Volvo Research Foundation (Other consultants Prof D Mohan, Dr S Mukherjee, Dr P Mahajan)
   
   
3. MHRD, Rs 5 lacs, (Other investigators - Dr S Mukherjee, Dr PMV Subbarao)
   
   
4. Development of methodology for modeling of airbags for OOP study, Japan Automobile Research Institute, US$ 30000 (Other investigators, Dr S Mukherjee, Prof D Mohan)
   
   
5. Technology Development for collecting Bone and Tissue properties and development of Human Body FE Model - Phase II, Japan Automobile Research Institute, US$ 60000 (Other investigators, Dr S Mukherjee, Prof D Mohan)
   
   
6. Technological Evaluation of RTVs, Transport Department of Govt of Delhi, 2 lacks, (Other investigators - Dr S Mukherjee, Prof D Mohan)
   
   
7. Modernization of the Mechanisms Lab, MHRD, Rs 5.00 lacs (Other investigators - Dr S Mukherjee)
   
   
8. Rail Stress Calculations, RDSO, Lucknow, Rs 10.60 lacs, (Other consultants Dr S Mukherjee) (consultancy).]
   
   
9. Three Wheeler Crash worthiness Phase I, Bajaj Auto, Rs 5.00 lacs + US$2000, October 2000, PI: D Mohan,Co-PI: A Chawla, S Mukherejee. (consultancy)
   
   

TOP

Projects/Consultancies Completed

1. Setting up of Computer Aided Graphics Instruction Lab, ICICI, Rs 8.0 million. (Other investigators: Dr S Mukherjee, Drs MR Ravi, PVM Rao, Profs VP Agarwal and K Athre)
   
   
2. Development work on TG sets of 220MW NPPs in the areas of a. Fatigue analysis of Lp blades and b. On line diagnostic System, Funded by BRNS, Total Project cost Rs 1.5 million (approx). (Other investigators: Prof JS Rao, Prof RK pandey)
   
   
3. Design of a Creep Testing Machine for Fibre Ropes, AICTE, Rs 0.5 million. (PI: Dr R Chattopadhyaya)
   
   
4. Development of Simulators to assist proactive shopfloor control, DOE, Rs 3.4 million. (PI: Dr S Wadhwa)
   
   
5. An automated approach to manufacturability based design of die cast components, DST, Rs 0.15 million approx.
   
   
6. Modernisation of Design Engineering Laboratory, MHRD, Rs 1.5 million (as CI, PI: Prof VP Agarwal)
   
   
7. Knowledge Based Environment for Engineering Design, Funded by IIT, Total Project Cost Rs 50,000/-.
   
   
8. Safety of Front Seat Passengers: Analysis of Vehicele Performance, TELCO, Rs 5 lacs. (PI: Prof D Mohan) (consultancy)
   
   
9. Safer Truck Fronts: Phase I, Volvo Truck Corporation, US$30,000.00 (PI: Prof D Mohan) (consultancy)
   
   
10. Shortlisting of Junior Engineers, NOIDA, Rs 2.2 lacs (Other consultant: Dr S Sanghi) (consultancy)
    
    
11. Consultancy to Noida, The NOIDA authority, 45,000/-, Aug 2000, 5 months, Dr A Chawla, Dr S Sanghi AM (consultancy).
    
    
12. Consultancy to Noida, The NOIDA authority, 200,000/-, Dec 2000, 6 months, Dr A Chawla, Dr S Sanghi AM (consultancy).
    
    
13. Prediction of Safety of head and neck from bullet impact without penetration on a helmet, Delhi Police, Rs 0.17 million (PC: Dr S Mukherjee) (consultancy)
    
    
14. Modeling of car-motor cycle crashes, Japan Automobile Research Institute, US$37000 (Other consultants: Prof D Mohan, Dr S mukherjee, Dr P Mahajan) (consultancy)
    
    
15. Crash Simulation of the car – MC crash using Pamcrash (Ph – II), Japan Automobile Research Institute, 14,35,438/-, (Other consultants, Dr S Mukherjee, and Prof D Mohan) (consultancy).
    
    
16. Sample studies regarding car-mc simulation – I, Japan Automobile Research Institute, 184,186/-, (Other consultants Dr S Mukherjee, and Prof D Mohan) (consultancy).
    
    
17. Consultancy in conducting CAD training courses using Pro Engineer, IIS-Scientific Computng Rs 10,000/- (initial for Phase I). (Other consultants: Drs S Mukherjee, PVM Rao) (consultancy)
    
    
18. Consultancy in conducting training courses using Pro / Engineer, IIS Scientific Computing – Phase II, Rs 125,000/- (Other consultants: Drs S Mukherjee, PVM Rao)
    
    
19. Consultancy in conducting training courses using Pro / Engineer, IIS Scientific Computing – Phase IV, Rs 150,000/- (Other consultants: Drs S Mukherjee, PVM Rao)
    
    
20. Consultancy in running CAD training courses (Ph III), IIS Scientific Computing, Rs 1.68 lacs, (PI: A Chawla, Other consultants: Dr S Mukherjee, Dr PVM Rao) (consultancy)
    
    
21. CAD / CAM Courses using Pro Engineer, Hero Global Design Systems, Rs 6.57 lacs, (PI: Dr S Mukherjee, Dr A Chawla, Dr PVM Rao) (consultancy)
    
    
22. Technology Development for bone and tissue properties and development of human body FE model – Phase I, Japan Automobile Research Institute, Rs 14.49 lacs(consultancy), (Other consultants, Dr S Mukherjee, and Prof D Mohan).
    
    
23. Development of methodology for modeling of airbags, Japan Automobile Research Institute, Rs 4.85 lacs, (Other investigators, Dr S Mukherjee, and Prof D Mohan).
    
    
24. Development of instrumentation systems and related technology for condition monitoring of …., DST, Rs 26 lacs (Total project cost: Rs 1.26 crores, other agencies involved: CSIO, BHEL, IIT Kanpur). (Co-PI: Dr S Mukherjee)
    
    
25. Crash Simulation of the car – MC crash using Pamcrash (Ph – II), Japan Automobile Research Institute, US$26400, (Other consultants, Dr S Mukherjee, and Prof D Mohan) (consultancy).
    
    
26. Crash Simulation of the car – MC crash using Pamcrash (Ph – II), Japan Automobile Research Institute, US$10000, (Other consultants, Dr S Mukherjee, and Prof D Mohan) (consultancy).
    
    
27. Sample studies regarding car-mc simulation – II, Japan Automobile Research Institute, 162,227/-, (other consultants, Dr S Mukherjee, and Prof D Mohan) (consultancy).
    
    
28. CAD / CAM Courses using Pro Engineer, Hero Global Design Systems, Rs 5.25 lacs, started July, 2001 (expected duration 3 months), (PC: Dr S Mukherjee, Other consultants Dr A Chawla, Dr PVM Rao), (consultancy).

TOP