|
List of papers in journals: (Accepted / Published)
1. Arora N, Jain V, Chawla A, Mathur VP, Effectc of addition of Saphire
(Aluminum Oxide) or Silver Fibres on the
Flexural Strength, Thermal Diffusivity and Water Sorbion
of heat polymerized acrylic resins, International Journal of
Prosthodontics and Restorative Dentistry, Vol 1
No 1, April – June 2011, pp 21-27.
2. Chawla A, Mukherjee
S, Hassan AH, Grover V, Ng E, “Car Accident Reconstruction and Head
Injury Correlation”, Institute of Engineers Journal of India, accepted.
3. Kranthi Teja, A Chawla, S MUkherjee, Determining
the strain rate dependence of cortical and cancellous
bones of human tibia using a Split Hopkinson Pressure Bar, Accepted for
International Journal of Crashworthiness.Vol-18, Issue-1,Feb-2013 ,
PP:11-18 PDF
4. Balarman K., S. Mokherjee, A. Chawla, R.
Malhotra, “Dynamic Compressive Response Of
Passive Human Muscles Using Split Hopkinson Pressure Bar”, Indian Journal Of Biomechanics, Vol-3, Issue
1-2, December 2012 PDF
5. Dhaval Jani, A Chawla, S Mukherjee, R Goyal,
V Nataraju, S Jayraman,
REPOSITIONING THE KNEE JOINT IN HUMAN BODY FE MODELS USING A GRAPHICS
BASED TECHNIQUE, Traffic Injury Prevention, 13:640-649, 2012, PDF
6.
D Jani, A Chawla,
S Mukherjee, R Khattri, DARSS: A Hybrid
smoother for all hexahedral meshes, Engineering With Computers, Volume
28, Issue 2 (2012), P 179-188 PDF
7.
D Jani, A Chawla,
S Mukherjee, R Goyal, N Vusirikala,
S Jayaraman, Repositioning Human Body FE Models
– and a case study for the lower extremity model, Traffic Injury
Prevention, DOI No. 10.1080/15389588.2012.664669, April 2012 PDF
8.
Aditya V Maheshwari, Anoop Chawla, Obi U Osuji, Rajesh Malhotra, Yash Gulati, Fracture of
the Outer Metallic Head of the Bipolar Hip Prosthesis: An Unusual Bearing
Surface Failure, to appear in Journal of Anthroplasty.
Volume 27,Issue-2,Feb 2012, Pages-323.e9-323.e12
9.
A Soni, A Chawla, S
Mukherjee, R Malhotra , Effect of
the Impactor Mass on the response of the knee
joint during finite element simulations, International Journal of Vehicle
Safety, Vol 5 No 2, 2011 pp
189-195
10.
A Soni, A Chawla, S Mukherjee, R Malhotra, Effect of muscle contraction on the lower limb
response in low speed car pedestrian lateral impact - simulations for a
walking pedestrian, Vol 14, No 4, International
Journal of Crashworthiness, pp 1754-2111 PDF
11.
S Mukherjee, Chawla A,
A road crash reconstruction technique, Vol 91,
July 2010, Institute of Engineers Journal, pp
3-8. PDF
12.
A Soni,
A Chawla, S Mukherjee, R Malhotra,
Effect of muscle contraction in high speed car-pedestrian impact -
simulations for walking posture, Accepted for
International Journal of Vehicle Safety. Vol 5,
No. 2 , 2011 PDF
13. Subhash Wadhwa, Bibhushan,
Jitendra Madaan and Anoop Chawla, An object-oriented framework for modelling control policies in a
supply chain, Accepted for publication in Int J
of Value Chain Mngmt
14.
Jani D, Chawla A,
Mukherjee S, Goyal R, Nataraju
V, Repositioning the Human Body Lower Extremity FE Model, SAE
International Journal of Passenger Cars – Mechanical Systems, Volume 2 No
1, pp 1024-1030, October 2009. PDF
15. Soni A, Chawla A, Mukherjee
S, Malhotra R, Response of tonic lower limb FE
model in various real life car-pedestrian impact configurations – a
parametric study for standing posture, Int. J. Vehicle Safety, Vol. 4,
No. 1, 2009, pp 14-28. PDF
16. Soni A, Chawla A, Mukherjee
S, Malhora R, Response of lower limb in full
scale car-pedestrian low speed lateral impact- Influence of muscle
contraction, International Journal of Crashworthiness, Vol. 14, No. 4,
August 2009, 339–348. PDF
17.
Chawla A, Mukherjee S and Karthikeyan
B, Characterization of human passive muscles for impact loads using
genetic algorithm and inverse finite element methods, Biomechanics and
modelling in mechanobiology, Volume 9, Issue 1,
page 67-76. PDF
18. Chawla A, Mukherjee S and Iyer
SK, Use of optimization to position dummies in crash simulations,
Institute of Engineers Journal, Vol 89, July
2008, pp 42-46. PDF
19. Chawla A, Mukherjee S, Soni A and Malhotra R,
Effect of active muscle forces on knee injury risks for pedestrian
standing posture at low speed impacts, Vol 9,
No. 6, 2008, Traffic Injury and Prevention, pp
544-551. PDF
20. Chawla A, Soni A and Mukherjee S, Effect of active muscles on knee ligament forces during
impact, Journal of Biomechanics, Vol 39, Suppl 1, 2006, P-S160. PDF
21. Karthikeyan B, Chawla A and Mukherjee S, Inverse finite element characterization of soft tissues using genetic algorithm,
Journal of Biomechanics, Vol 39, Suppl 1, 2006, P-S491. PDF
22.
Karthikeyan B, Mukherjee S, Chawla
A, Malhotra R, Inverse Finite Element
Characterization of Soft Tissues Using Impact Experiments and Taguchi
Methods, Transactions Journal of Passenger Cars – Mechanical Systems, SAE
2006, SAE paper No 2006-01-252. PDF
23. Chawla A, Mukherjee S and Snarma
A, An algorithm for optimized generation of a finite element mesh for
folded airbags, International Journal of Crashworthiness, Vol 10, No 3,
2005, pp 2459-266. PDF
24. Mukherjee S, Chawla A, Karthikeyan B, A
review of the mechanical properties of human body soft tissues in the
head, neck and spine, Institute of Engineers Journal, Vol
87, November 2006, pp 10-24. PDF
25. Mukherjee S, Chawla A, Karthikeyan B, A
review of the mechanical properties of human body soft tissues in the
chest, abdomen and upper extremity, Institute of Engineers Journal, Vol 87, November 2006, pp
3-9 PDF
26.
S. Mukherjee, A. Chawla,
J. Jangra, Issues in ALE simulation of airbags,
to appear in the International Journal of Crashworthiness?? PDF
27. Chawla A, Mukherjee S, Mohan D and Nayak
A, Investigating the rollover propensity of a 15 seater
mini bus, The International
Journal of
Vehicle Safety, Vol 2, Nos ˝, 2007. PDF
28.
Mukherjee S, Chawla A, Nayak A and Mohan D, Rollover crashworthiness of a
rural transport vehicle using Madymo,
International Journal of Crashworthiness, 2006, Vol
11 No 5, pp 495-503. PDF
29.
Mukherjee S, Chawla A, and Iyer SK,
Positioning of motorcycle dummies in crash simulations, International Journal of Crashworthiness, Vol 11 No 4, pp337-343, 2006.PDF
30.
Mukherjee S, Chawla A, Mohan D, Chandrawat
S and Kumar V, Predicting throw distance variations in Bicycle crashes,
International Journal of Vehicle Safety, Vol 1,
No 4, 2006.PDF
31. Mukherjee S, Chawla A, Karthikeyan B, Soni A, Mohan D, Finite element crash simulations of
the human body: Passive and active muscle modeling, Saadhana,
Vol 32, No 4, pp
409-426, August 2007 PDF
32. Chawla A, Mukherjee S, Chawla
A and Mohan D, Motorcycle safety device investigation: A case study on
airbags, Saadhana, Vol
32, No 4, pp 427-444, August 2007. PDF
33. Mukherjee S, Gawade T, Chawla A and
Mohan D, Three-wheeled scooter
taxi: A safety analysis, Saadhana, Vol 32, No 4, pp 459-478,
August 2007. PDF
34.
Chawla, Sandeep Kadam, Singh
S .P, Dynamic modelling based optimal design of
a crash helmet, Computer-Aided Design and Applications, Vol. 3, Nos. 1-4,
2006, to be published, http://www.cadanda.com PDF
35.
Darpe A K, Gupta K, Chawla
A, Dynamics of a Bowed Rotor with a Transverse Surface Crack, accepted
for publication in Journal of sound and vibration
36.
Chawla A, Mukherjee S, and Sharma
A, Development of FE meshes for folded airbags, International Journal of
Crashworthiness, 2005, Vol 10, No 3, pp 259-266. PDF
37.
Chawla A, Bhosale
PV, Mukherjee S, Modeling of folding of Passenger side Airbag mesh, SAE
Paper No 2005-26-059. PDF
38.
Chawla A, Mukherjee S, Mohan D,
Bose D, Rawat P, Nakatani
T and Sakurai M, FE Simulations of motorcycle car frontal crashes,
validations and observations, International Journal of Crashworthiness,
2005, Vol 10, No 4, pp
319-326. PDF
39. Chawla A., S. Mukherjee, D. Mohan, Dipan
Bose, Prakash Rawat,
M. Sakurai, T. Nakatani, FE Simulations of Car
– Motor cycle frontal crashes, Jari Research
Journal, 2004, Vol 26 No 10, pp 37-43.
40. Chawla
A, Mukherjee S and Sharma A, Mesh Generation for folded airbags, Computer
Aided Design and Applications, Vol 1 No 1-4,
P269-276, 2004. PDF
41. Darpe AK, Gupta K, Chawla
A, Transient
response and breathing behaviour of a cracked
Jeffcott rotor, JOURNAL OF SOUND AND VIBRATION
272 (1-2): 207-243 APR 22 2004 PDF
42. Darpe AK, Gupta K, Chawla
A, Coupled
bending, longitudinal and torsional vibrations of a cracked rotor, JOURNAL OF SOUND AND VIBRATION 269 (1-2): 33-60 JAN
6 2004 PDF
43.
A.K.Darpe, K.Gupta and A.Chawla,
Experimental Investigation of the response of a cracked rotor to periodic
axial excitation, Journal of Sound and Vibration, Vol
260 (2003), p 265-286. PDF
44.
A.K.Darpe, K.Gupta and A.Chawla,
Dynamics of a two crack rotor, Journal of Sound and Vibration, Vol 259, No 3, 2003 pp
229-235. PDF
45. Dileep Kumar, A Chawla, S Mukherjee, T Nakatani
and M Ueno, Prediction of Crushing behaviour of
honeycomb structures, International Journal of Crashworthiness, Vol 8, No 3, 2003, pp
229-235. PDF
46. J.
S. Rao, Ashish K Darpe, A. Chawla, Kapil Bharati, D.A.Roy, C.K. Pithawa, Umesh Chandra, A. Rama Rao,
N.P.S. Gill, “Development
Of Online Diagnostic System Software For Turbogenerator
Set Of Kakarapara Atomic Power Station",
Advances in Vibration Engineering, Vol 1, no 4,
2003, p 305-321. PDF
47.
AK Darpe,
A Chawla and K Gupta, Analysis of the response
of a cracked Jeffcot rotor to axial excitation,
Vol 249 No 3, Journal of Sound and Vibration,
2002. PDF
48. Rao JS, Pathak
A, Chawla A, Blade life: A comparison by
cumulative damage theories, JOURNAL OF ENGINEERING
FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME 123 (4): 886-892 OCT
2001
49. NAKATANI
T, SAKURAI M, CHAWLA A and MUKHERJEE S, A methodology for
Motorcycle-vehicle Crash Simulation-Development of Motorcycle Computer
Simulation Model, Jari research Journal,
Vol.23, No.10, p28-35, 2001 PDF
50.
Chawla A, Mukherjee, S, Mohan D, Singh M, Sakurai M and Nakatani T, “A Methodology for car – motorcycle crash
simulation, Jari Research Journal, 2001, Vol 23, No 2, pp 18-21.
51.
A Chawla,
Dinesh Mohan, Vivek Sharma and Janusz Kajzer, Safer Truck
front design for pedestrian impacts, Journal of crash prevention and
injury control, March 2000, Vol 2(1), pp 33-43.
52.
KR Bhupal
Reddy, D Prasad Raju, S Wadhwa
and A Chawla, Applications of Simulated
annealing to the cell formation, Industrial Engineering Journal, Vol XXIX, No 8, August 2000, pp
2-26.
53. KR
Bhupal Reddy, S Wadhwa
and A Chawla, Application of back propagation
artificial neural networks in cellular manufacturing, Journal of
Production Engineering, Institution of Engineers (I), v80,
November 1999,
pp.43-46. ***Awarded Certificate of Merit***
54.
A Chawla,
K Raviraju and Amit
Gupta, Expert System for DFM of Die Cast Components, Journal of
Mechanical Engineering, Institution of Engineers, India, Vol 78, February 1998. PDF
55.
A Chawla,
D Mohan and V Sharma, Computer simulation of bus roll over crashes,
Indian Journal of Transport Management, March, 1998, Vol. 22(3), pp
135-142.
56.
D Mohan, J Kajzer,
KS Bawa Bhalla and A Chawla, Impact Modeling Studies for a three wheeled
scooter taxi, Journal of Accident analysis and Prevention, Vol 29, No 2, 1997, PP161-170.
List of papers in Conferences: (Accepted / Published)
1. Sankarasubramanian
H., Chawla A., Mukherjee S., Goehlich D., A method to compare and quantify threat
to pedestrian using injury cost measure”, Submitted for IRCOBI 2013.
2.
Mike
W.J. Arun , Sudipto
Mukherjee, Anoop Chawla, Girish Sharma, Parthiv
Shah, Christophe Ageorges Characterization
of human long bones using experiments, imaging and inverse finite element
techniques IRCOBI 2013 submitted
3.
marathe ratnakar, chawla anoop, mukherjee sudipto, rajesh malhotra “Spline approximations for Modeling
Thoracic and Lumbar Spinal Trajectories for Sagittal Plane Movement in a
FE-HBM” , International
Symposium on: “Human
Modelling and Simulation in Automotive Engineering” May 12-14 2013
4. Schwanitz
P., Sankarasubramanian H., Werner W. J. S., Göhlich D., Chawla A.,
& Mukherjee S. , 2012, Methodology for multiparameter optimization during the concept phase
for crash relevant vehicle structures. 9. Weimarer Optimierungs-
und Stochastiktage (pp. 1-13)
5. H. Sankarasubramanian, S. Mukherjee, A. Chawla, Indian Institute of Technology, Delhi,
India.” optimization of vehicle front for safety of pedestrians”,
Enhanced Safety Of Vehicles, 2011, Paper number: 11-0422 PDF
6. S.
Mukherjee, A. Chawla, K. Marwah,
L. Grover, J. Keishing, Mechanical Engineering,
Indian Institute of Technology Delhi India, “dynamic properties of human cancellous bones” enhanced Safety Of Vehicles, 2011,
Washington, D.C., June 13-16, 2011., Paper Number 11-0429 PDF
7. S.
Mukherjee, A. Chawla,S. Borouah,D.
, Sahoo, Mike W. J. Arun
, Department of Mechanical Engineering, IIT Delhi , India, G. Sharma, P.
Shah, C. Ageorges , Mercedes Benz R&D India
,” dynamic properties of the shoulder complex bones” Enhanced Safety Of
Vehicles, 2011, Washington, D.C., June 13-16, 2011. Paper Number
11-0428 PDF
8. H.
Sankarasubramanian, S. Mukherjee, A. Chawla” A passenger car-front optimization using
Genetic Algorithm for safety of pedestrian during a vehicle-pedestrian
impact” IRCOBI 2011, Krakow, Poland
PDF
9. Ratnakar S, S. Mukherjee, A. Chawla, R. Malhotra”
Predicting Thoracic Spinal Postures In Finite Element Model With Bezier Technique“IRCOBI 2011,Krakow,Poland PDF
10. H. Sankarasubramanian, S. Mukherjee, A. Chawla, D. Göhlich,
“Optimization of Car Front Profile Using a Single Objective Function for
Safety of Pedestrian in a Car-Pedestrian Impact” IRCOBI
2012Dublin,Ireland PDF
11. Mike W
J Arun, S. Mukherjee, A. Chawla,
G Sharma, P Shah, C. Ageorges,” Estimating
Dynamic properties of long bones under impact bending using inverse
finite element method” CMBBE 2012, April 11-14, 2012, Berlin ,
Germany. PDF
12. H.
Subramanian, D. Göhlich , S. Mukherjee and A. Chawla,”
A bio-mechanics based methodology to optimize vehicle front profile for
pedestrian safety” CMBBE 2012 ,, paper no. 223 , April 11-14, 2012,
Berlin , Germany. PDF
13. D Jani, A Chawla, S
Mukherjee, R Malhotra, R Goyal,
R Khatri, N Vusirikala,
S Jayaraman, Repositioning the human body fe
model at the hip (femuropelvic) joint, IRCOBI
2010. PDF
14. R Marathe, A Chawla, S
Mukherjee, R Malhiotra, Prediction of lumbar
spine posture for repositioning of spinal fe
model, IRCOBI 2010 PDF
15. A Soni, A Chawla, S
Mukherjee, R Malhiotra, Lateral bending moment
threshold of the knee joint – effects of active muscles, IRCOBI 2010. PDF
16. A Chawla, WJA Mike, S Mukherjee, Predicting Fracture in
Human Bones under Impact, World Congress on Biomechanics, 2010.
17. A Soi, A Chawla, S Mukherjee,
R Malhotra, Repositioning methodology for fe-hbm pelvis flesh to account for upper extremity
posture change, submitted to the SAE World Congress 2011. PDF
18. Mike WJA, S
Mukherjee, A Chawla, Reconstructing fracture
progression in impact, ESAR Conference 2010. PDF
19. Teja K, S
Mukherjee, A Chawla, Elastic response of bones
at varying strain rates, ESAR Conference 2010 PDF
20. Jain A, Mukherjee
S and Chawla A, “Parameter Estimation for a CMM
for bones” Proceedings of the 4th National Conference on Instrumentation
and Control Engineering ICECON ’09, Dec 2009, pg
71-74.
21. A Chawla, S Mukherjee, H Warhatkar,
R Malhotra, “Dynamic characterization of bovine
medial Collateral ligaments” IRCOBI Conference Proceedings. International
Research Council on the Biomechanics of Injury, York, Sep 2009, pp 109-113, PDF
22. Anurag Soni, Anoop Chawla, Sudipto Mukherjee,
Rajesh Malhotra, “Effect of muscle contraction
in high speed car pedestrian impact –Simulations for walking posture”,
IRCOBI Conference Proceedings. International Research Council on the
Biomechanics of Injury, York, Sep 2009, pp
237-250 PDF
23. Dhaval Jani, Anoop Chawla, Sudipto Mukherjee,
Rahul Goyal, V Nataraju
“Human body FE model repositioning: a step towards posture Specific –
human body models (PS-HBM)”, IRCOBI Conference Proceedings.
International Research Council on the Biomechanics of Injury, York, Sep
2009, pp 327-340 PDF.
24. Anurag Soni, Anoop Chawla, Sudipto Mukherjee,
Rajesh Malhotra “Effect Of Muscle Contraction
In Low Speed Car-Pedestrian Impact – Simulations For Walking Posture”,
21st ESV, Stuttgart, June 2009, Paper Number 09-0366-O PDF
25. Anurag Soni, Anoop Chawla, Sudipto Mukherjee,
Rajesh Malhotra , “Sensitivity Analysis of
Muscle Parameters and Identification of Effective Muscles in Low Speed
Lateral Impact”, Paper 2009-01-1211, SAE World Congress, Detriot, Apr 2009 PDF
26. Dhaval Jani, Anoop Chawla, Sudipto Mukherjee,
Rahul Goyal, V Nataraju
“Repositioning the Human Body Lower Extremity FE Model”, Paper 2009-01-0922, SAE World Congress,
Detriot, Apr 2009 PDF
27. Hemant Warhatkar, Anoop Chawla, Sudipto Mukherjee,
Rajesh Malhotra ,” Experimental Study of Variation between
Quasi-Static and Dynamic Load Deformation Properties of Medial Collateral
Knee Ligaments” Paper
2009-01-0392, SAE World Congress, Detriot Apr
2009. PDF
28. Soni, A., Chawla, A., Mukherjee, S and Malhotra
R. 2008, "Response of lower extremity in car-pedestrian
impact-influence of muscle contraction. IRCOBI Conference Proceedings.
International Research Council on the Biomechanics of Injury, Zurich, pp.
469-472. PDF
29. Mukherjee S, Chawla A, Mohan d, Singh M, and Dey
R, Effect of Vehicle design on Head Injury
Severity and throw distance variations in bicycle crashes, Proceedings
of the Enhanced Safety of Vehicles Conference 2007, Lyon, France, June
2007.PDF
30. Soni A, Chawla A, Mukherjee S, Effect of Muscle Contraction
on knee loading for a standing pedestrian in lateral impacts, Proceedings
of the Enhanced Safety of Vehicles Conference 2007, Lyon, France, June
2007.PDF
31. Chawla A, Mukherjee
S, Soni A, Malhotra
R, Effect of active muscle forces on knee injury risks for pedestrian
standing posture at low speed impacts, Proceedings of the IRCOBI 2007
conference, September 2007, Maastricht, Holland PDF
32. M. Singh, R. Dey, S. Mukherjee, D.
Mohan, A. Chawla, Effect of vehicle design in
bicycle frontal crashes, Proceedings of the IRCOBI 2007 conference,
September 2007, Maastricht, Holland PDF
33. Chawla A, Soni A and Mukherjee S, Effect of active muscles on
knee ligament forces during impact, accepted for World congress of
Biomechanics 2006. PDF
34. Karthikeyan B, Chawla A, Mukherjee S, Inverse finite element
characterization of soft tissues using genetic algorithm, accepted for
World congress of Biomechanics 2006. PDF
35. S. Mukherjee,
A. Chawla, D. Mohan, V. Agrawal
and S. Chadrawat, Throw distance in bicycle
frontal crashes, accepted for IRCOBI 2006. PDF
36. Chawla , S. Mukherjee,
R Marathe, B Karthikeyan,
R Malhotra, Determination of Strain rate
dependence of human body soft tissue properties using a SHPB accepted for
IRCOBI 2006. PDF
37. Chawla A, Sandeep K and Singh SP, Dynamic modeling based
optimum design of a crash helmet, Proceedings of CAD ’06 conference held
in Bangkok in June 2006. PDF
38. Chawla A, Sharma G
and Mukherjee S, A technique for developing FE meshes for human bones
from CT / MRI scan data, Proceedings of CAD ’06 conference held in
Bangkok in June 2006.
39. Sharma
A, Chawla A, Mukherjee S, A tool for developing
FE meshes for folded airbags, Proceedings of CAD ’06 conference held in
Bangkok in June 2006. PDF
40.
B.Karthikeyan,
A. Chawla, S. Mukherjee and A. Soni, Effect of Impactor
mass in free fall impact tests on isolated passive muscle tissue, to
appear in Proceedings of 12th
International Conference on Biomedical Engineering (ICBME 2005),
Singapore..
PDF
41.
Karthikeyan B,
Mukherjee S, Chawla A, Malhotra
R, Inverse Finite Element Characterization of Soft Tissues Using Impact
Experiments and Taguchi Methods, Proceedings of SAE 2006 World Congress. PDF
42.
Soni A, Chawla
A and Mukherjee S, Effect of Active Muscle Forces on the Response of knee
Joint at Low Speed Lateral Impacts, Proceedings of SAE 2006 World Congress PDF
43.
Marathe R, Mukherjee S, Chawla A, and Malhotra R,
Strain rate dependence of human body soft tissues using SHPB, First
International Conference on Mechanics of biomaterials and tissues, ICOMBT
2005. PDF
44. Chawla A, Mukherjee
S, Mohan D and Jain S, Validation of the cervical spine model in Thums, Proceedings of ESV 2005, held in Washington
DC, June 2005, Paper No 05-0184-O. PDF
45. S. Mukherjee, A Chawla, A. Nayak and D. Mohan, Rollover crash analysis of the RTV using Madymo,
Proceedings of ESV 2005, held in Washington DC, June 2005, Paper No
05-0186-O. PDF
46. Rogers N, Zellner J, Chawla A and Nakatani T, Methodologies for motorcyclist injury
prevention by use of computer simulations, Proceedings of ESV 2005, held
in Washington DC, June 2005. Paper No 05-0311-W.
47.
Mukherjee S, Chawla A, Jangra
J, Studies in
Motor cycle airbags, proceedings of IRCOBI September 2005. PDF
48.
Mukherjee S, Chawla A, Nayak A and Mohan
D, Rollover crash analysis of the RTV using Madymo,
accepted for SIAT’05, to be held in Pune, in January 2005.
49.
Chawla, Bhosale
P and Mukherjee S, Modeling of foldig of
passenger side airbag mesh, SIAT’05, held in Pune, in January 2005. PDF
50.
A Chawla, S Mukherjee, D Mohan and A Parihar, Validation of lower extremity model in Thums, Proceedings of IRCOBI 2004, Graz, Austria, 2004. PDF
51.
Rogers N, Zellner
J, Chawla A and Nakatani
T, Methodologies for motorcycle injury prediction by means of computer
simulations, Proceedings of IRCOBI 2004, Graz, Austria, 2004. PDF
52.
A Chawla, S Mukherjee, D Mohan and Jain S, Validation
of the cervical spine model in Thums,
Proceedings of the Canadian Multidisciplinary Road Safety Conference,
Ottawa, Canada, June 2004.
53.
Chawla A, Mukherjee S and Sharma A, Mesh Generation of folded airbags,
Proceedings of the International CAD conference, May, 2004, Pattaya, Thailand.
PDF
54. Mukherjee S, Chawla A, Human Tolerance and Crashworthiness,
Seminar on World Health Day, April 14, 2004. PDF
55. Chawla, S.
Mukherjee, J.S. Rao and Ashish
K. Darpe, Development of an Online Diagnostic
System Software For Turbo generator Set of GGSSTPP Power Station Ropar, Workshop on condition monitoring, Chandigarh,
January 2004. PDF
56.
Modeling
of body parts consisting of bones as well as soft tissue: An experimental
and finite element study, S. Mukherjee*, A. Chawla, D. Mohan and M. Metri,
Proceedings of IRCOBI 2003. PDF
57.
Chawla A, Mukherjee S and Sharma A, A tool for developing FE meshes for
folded airbags, Proceedings of NACOMM, 2003, New Delhi India.
58. Chawla A, Mukherjee
S and Sharma A, FE mesh generation for folded cloth – an application in
airbags, proceedings of Workshop on textile ropes and cordages, December
2003, Delhi, India. PDF
59. Chawla A, Mukherjee
S and Sharma A, Development of FE mesh for folded airbags, Proceedings of
Chine PAM 2003, Shanghai, China. PDF
60.
Darpe A, Gupta K and Chawla A, Response of a
rotor with an unstable propagating crack, Proceedings of Implast 2003.
61.
Chawla A, Mukherjee S, Mohan D, Rajiv Kr, Tushar
Gawade, FE Simulation studies of a three
wheeled scooter taxi, Proceedings of China PAM 2002, Beijing, 2002. PDF
62.
Chawla A, Mukherjee S, Mohan D, Singh Jasvinder
P, Nadeem Rizvi,
Crash Simulations of a three wheeled scooter taxi, Proceedings of ESV
2003, may, 2003, Magoya, Japan. PDF
63.
Chawla A, Mukherjee S, Mohan D, Bose D,, Sakurai M, Nakatani
T, FE simulations of car – MC frontal crashes – validations and observations,
Proceedings of ESV 2003, May 2003, Nagoya, Japan. PDF
64.
Chawla A, Mukherjee S and Mohan D, Impact biomechanics in two wheeled
and three wheeled vehicles, Proceedings of Symposium on large
deformations, September 2002, Delhi. PDF
65.
S Mukherjee, A Chawla, D Mohan, M Singh, T Nakatani
and M Sakurai, Modeling Car – MC Side impact Simulations, to appear in
Proceedings of IRCOBI 2001, to be held in Isle of Man, UK from Oct 10-12,
2001 PDF
66.
T Nakatani,
M Sakurai, Chawla A and Mukherjee S, A
methodology for motorcycle-vehicle crash simulation -development of
motorcycle computer simulation model, to appear in JSAE, October 23-25,
2001 PDF
67.
T Nakatani,
M Sakurai, Chawla A and Mukherjee S,
Motorcycle-vehicle crash simulation construction of motorcycle model, to
appear in JASME, September 21, 2001
68.
JS Rao,
R Sreenivas and A Chawla,
Analytical and Experimental Investigations of misaligned rotors, to
appear in Proceedings of ISROMAC-9, PDf
69.
JS Rao, R Sreenivas and A Chawla, Experimental investigation of misaligned
rotors, Proceedings of ASME Turbo Expo 2001.
70.
S Mukherjee, A Chawla et al, Modeling of head impact on laminated
glass wind shields, Proceedings of IRCOBI 2000, Montpellier, France, September 2000.
PDF
71.
Mukherjee S, Chawla A, Mohan D, Singh M, Sakurai M and Nakatani T, Motor cycle wall crash, simulation and
validation, Proceedings of Pam Users Conference Asia 2000. PDF
72. S Mukherjee, A
Chawla, P. Mahajan
and D Mohan, "Preliminary analysis (using PAMCRASH)of
likelihood of neck injuries to helmet wearing personnel when hit by
bullets", 5th Injury Prevention and Control Conference, N. Delhi,
February 2000.
73.
J. S. Rao,
Ashish K Darpe, A. Chawla, Kapil Bharati, D.A.Roy, C.K. Pithawa, Umesh Chandra, A. Rama Rao, N.P.S.
Gill, " Development Of
Online Diagnostic System Software For Turbo generator Set Of Kakarapara Atomic Power Station", VETOMAC-I,
2000.
74.
KR Bhupal
Reddy, S Wadhwa and A Chawla,
Simulated annealing based cell formation methodology for parts with multiple
routings, Proceedings of the third international conference on operations
and quantitative management, University of Western Sydney, Sydney,
Australia, Dec 2000.
75.
A Chawla,
JS Rao and A Pathak,
Blade Life - a comparison by cumulative damage theories, ASME TURBO EXPO
- 99, organized by ASME in Indianapolis in June 1999.
76.
A Chawla
and S Mukherjee, Graphics Science in Engineering Education, Proceedings
of the 11th ISME conference, held in Delhi
from 3-5, 1999.
77.
A Chawla,
S Pandey and NR Naidu, An expert system for DFM
of welded parts, Proceedings of the SERC School on Advanced Manufacturing
Technology, held from November 2-14, 1998 in Delhi.
78.
A Chawla,
D Mohan and V Sharma, Computer simulation of bus roll over crashes,
Proceedings of IMECE-98.
79.
A Chawla,
Vivek Sharma, J Kajzer
and D Mohan, Safer truck Front Design, Proceedings of the 1998 IRCOBI
conference on the biokinetics of impact, held
in Goteberg, Sweden, September 16-18, 1998.
80.
A Chawla,
S Wadhwa and K Rama Bhupal
Reddy, Analysis of comparative performance studies on Job Shop and
Cellular Manufacturing Layouts, Proceedings of the 14th International conference on CAD/CAM
Robotics and Factories of the future, Nov 30 - Dec 3, 1998 Coimbatore
India.
81.
Chawla A, Sharma V and Mohan D, MADYMO as a tool to analyze India
specific traffic conditions, MADYMO User's meet, 1998.
82.
A Chawla,
KR Bhupal Reddy, D Prasad Raju
and S Wadhwa, Simulated annealing - An approach
to the cell formation, Proceedings of the 2nd International conference on Engineering
Design and Automation, held at Hawaii, Aug 9-12, 1998.
83.
A Chawla,
Wadhwa S and KR Bhupal
Reddy, Part mix perturbations in cellular manufacturing - a simulation
study, Proceedings of AIMTDR'98, held from Dec 1-3, 1998
84.
Chawla A, Wadhwa S, D Prasad Raju and KR Bhupal Reddy, Artificial Neural Networks - An
application in cellular manufacturing, Proceedings of the 2nd International Conference on Engineering
Design and Automation, held in Hawai, from
August 9-12, 1998.
85.
H Hirani
and A Chawla, Journal Bearing Design: An
integrated Approach, submitted for the Fifteenth National Convention of
Mechanical Engineers to be held in Hyderabad from December 16-18, 1999.
86.
H Hirani
and A Chawla, A simplified inverse solution to
the liquid lubricated head disk interface, submitted for International
conference on Tribology of Information Storage Devices, TISD-'99.
87.
H Hirani
and A Chawla, Tribology of Information Storage
Devices, submitted for the National Conference on machines and
mechanisms, 1999.
88.
A Chawla
and Vivek Sharma, Crash modeling of Indian Bus
structure, Proceedings of the 4th World Congress on injury prevention and
control, May 1998, Amsterdam, Netherland.
89.
A Chawla,
R Chattopadhyaya, Design of a creep testing
machine for industrial ropes, Proceedings of the NACOMM 1997 held in IIT
Kanpur, in December 1997.
90.
A Chawla
and Amit Gupta, Use of IT tools for DFM of Die
Cast Components, Proceedings of the National Conference on Information
Technology for Industrial and Organization Development, held in October
1997, in Delhi.
91.
D Mohan and A Chawla, “ Use of Computer
Modeling Techniques to optimize safety of country specific vehicles in
impact”, Proceedings of the International conference on new frontiers in
biomedical engineering, Tokyo, Japan (1997), PP281-284.
92.
Rao JS, Chawla A and Duttagupta
C, Development of an off-line expert system for the condition monitoring
of an aircraft engine, Proceedings of the 6th International Symposium on
Transport Phenomenon and Dynamics of Rotating Machinery, 1996, pp 455-463. PDF
93. D Mohan, Janusz Kajzer, KS Bawa Bhalla and Chawla A, Impact Modeling Studies for a three wheeler
scooter taxi, Proceedings of IRCOBI’95, held at Brunnen,
Switzerland, September, 1995. PDF
94. Chawla A and Sangal R, An Intelligent
Design System, Proceedings of the 7th AI in Engineering Conference, Waterloo,
Canada, 1992.
95. Chawla A and Sangal R, Functional Reasoning in Configurationally
Design, Proceedings of the 2nd AI in Design Conference, 1992.
96. Chawla A and Sangal R, Abduction in Design, Proceedings of the 4th
UNB AI Symposium, University of New Brunswick, Canada, 1991
97. Chawla A and Sangal R, Capturing Design Knowledge, Proceedings of
the Knowledge Acquisition Workshop, Banff, Canada, 1991.
98. A Chawla and S Ray, Design and drafting on PC based
systems, Proceedings of the 23rd Annual convention of the Computer
Society of India, held from January, 6-9, 1988 in Madras.
|
