Book Chapter

S. Giannis, P. Davies, A. Ameli, N.V. Datla, S. Azari, M. Papini, J.K. Spelt, P.L. Geiss, J. Cognard, E. Sancaktar and D.A. Dillard, “Durability”, in ‘Testing Adhesive Joints, Best Practices’, L.F.M.da Silva, D.A. Dillard, B. Blackman and R.D. Adams (Editors), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2012.

Journal Papers

T. O. Terefe, A. Chawla, N. V. Datla, Low-velocity nail penetration response of muscle tissue and gelatin, Forensic Science International, 361, 112082 (2024).

Y. S. Pydi, A. Nath, A. Chawla, S. Mukherjee, S. Lalwani, R. Malhotra, N. V. Datla, Strain rate dependent material properties of human lung parenchymal tissue using inverse finite element approach, Biomechanics and Modeling in Mechanobiology, 22, 2083–2096 (2023).

Mohd. Tauheed and N.V. Datla, Characterization and prediction of hygrothermally aged CFRP adhesive joint subjected to mode II load, Composites Part C, 11, 100357 (2023).

Mohd. Tauheed and N.V. Datla, Degradation prediction of mode I cohesive laws of hygrothermally aged CFRP adhesive joint using a direct method and accelerated aging, Polymer Composites, 44, 2173-2186 (2023).

A. Chanda, S.K. Sinha and N.V. Datla, Fiber alignment and mode-mixity effects on fracture behavior of CNF/epoxy nanocomposite adhesive joints, Composites Part B, 247, 110341 (2022).

A. Chanda, S.K. Sinha and N.V. Datla, Improved damage sensing with random/aligned carbon nanofiber in bulk epoxy and adhesive joints, Polymer Composites, 43, 6165-6179 (2022).

V. P. Sharma and N. V. Datla, Fracture behavior and reliability of low-silver lead-free solder joints, Journal of Electronic Packaging, 144, 041016 (2022).

Mohd. Tauheed and N.V. Datla, Mode I fracture R-curve and cohesive law of CFRP composite adhesive joints, International Journal of Adhesion and Adhesives, 103101 (2022).

V. P. Sharma and N. V. Datla, Effect of bond-line thickness and mode-mixity on the fracture behavior and traction separation law of Sn-0.7Cu solder joints , Engineering Failure Analysis, 131, 105855 (2022).

V. P. Sharma and N. V. Datla, Effect of aging time and loading rate on fracture behavior of Cu/Sn-0.7Cu solder joints , Microelectronics Reliability, 127, 114381 (2021).

U. C. Gautam, Y. S. Pydi, S. Selladurai, C. J. Das, A. K. Thittai, S. Roy and N. V. Datla, A PVA based phantom and training tool for use in simulated TRUS guided prostate needle biopsy procedures, Medical Engineering and Physics, 96, 46-52 (2021).

A. Chanda, S.K. Sinha and N.V. Datla, Electrical conductivity of random and aligned nanocomposites: Theoretical models and experimental validation, Composites Part A, 149, 106543 (2021).

A. Chanda, S.K. Sinha and N.V. Datla, The influence of fiber alignment, structure and concentration on mechanical behavior of carbon nanofiber/epoxy composites: Experimental and Numerical study, Polymer Composites, 42, 1155-1173 (2021).

A. Dadaniya and N.V. Datla, Degradation prediction of encapsulant-glass adhesion in the photovoltaic module under outdoor and accelerated exposures, Solar Energy, 208, 419-429 (2020).

A. Dadaniya and N.V. Datla, Multilayer backsheet characterization using diffusion experiments and optimization method for water diffusion simulation inside the photovoltaic module, IEEE Journal of Photovoltaics, 10, 306-314 (2020).

A. Chanda, S.K. Sinha and N.V. Datla, Tribological studies of epoxy-carbon nanofiber composites - Effect of nanofiber alignment using AC electric field, Tribology International, 138, 450-462 (2019).

Mohd. Tauheed and N.V. Datla, Mixed-Mode cohesive law estimation of composite joints made of toughened epoxy adhesive, Procedia Structural Integrity, 14, 354-361 (2019).

A. Dadaniya and N.V. Datla, Water diffusion simulation in photovoltaic modules based on characterization of encapsulant material using in-situ gravimetric technique, Solar Energy Materials and Solar Cells, 201, 110063 (2019).

R. Garg and N.V. Datla, Peeling of heterogeneous thin films: Effect of bending stiffness, adhesion energy, and level of heterogeneity, Journal of Adhesion, 95, 169-186 (2019).

M. Singh, N.V. Datla, S. Kondaraju and S.S. Bahga, Enhanced thermal performance of micro heat pipes through optimization of wettability gradient, Applied Thermal Engineering, 143, 350-357 (2018).

O.R. Patil, A. Ameli and N.V. Datla, Predicting environmental degradation of adhesive joints using a cohesive zone finite element model based on accelerated fracture tests, International Journal of Adhesion and Adhesives, 76, 54-60 (2017).

N.V. Datla and P. Hutapea, Flexure-based active needle for enhanced steering within soft tissue, Journal of Medical Devices, 9, 041005 (2015).

B. Konh, N.V. Datla and P. Hutapea, Feasibility of SMA wire actuation for an active steerable cannula, Journal of Medical Devices, 9, 021002 (2015).

M. Honarvar, N.V. Datla, B. Konh, T.K. Podder, A.P. Dicker, Y. Yu and P. Hutapea, Study of unrecovered strain and critical stresses in one-way shape memory Nitinol, Journal of Materials Engineering and Performance, 23, 2885-2893 (2014).

N.V. Datla, B. Konh, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu and P. Hutapea, A model to predict deflection of bevel-tipped active needle advancing in soft tissue, Medical Engineering & Physics, 36, 285-293 (2014).

N.V. Datla, B. Konh, J. Koo, D. Choi, T.K. Podder, Y. Yu, A.P. Dicker, K. Darvish and P. Hutapea, Polyacrylamide phantom for self-actuating needle-tissue interaction studies, Medical Engineering & Physics, 36, 140-145 (2014).

G. Jhin, S. Azari, A. Ameli, N.V. Datla, M. Papini and J.K. Spelt, Crack growth rate and crack path in adhesively bonded joints: Comparison of creep, fatigue and fracture, International Journal of Adhesion and Adhesives, 46, 74-84 (2013).

N.V. Datla, A. Ameli, S. Azari, M. Papini and J.K. Spelt, Effects of hygrothermal aging on the fatigue behavior of two toughened epoxy adhesives, Engineering Fracture Mechanics, 79, 61-77 (2012).

S. Azari, A. Ameli, N.V. Datla, M. Papini and J. K. Spelt, Effect of substrate modulus on the fatigue behavior of adhesively bonded joints, Material Science and Engineering A, 534, 594-602 (2012).

A. Ameli, N.V. Datla, S. Azari, M. Papini and J.K. Spelt, Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens, Composite Structures, 94, 779-786 (2012).

N.V. Datla, M. Papini, J. Ulchni, B. Carlson and J.K. Spelt, The effects of test temperature and humidity on the mixed-mode fatigue behaviour of a toughened adhesive aluminum joint, Engineering Fracture Mechanics, 78, 1125-1139 (2011).

N.V. Datla, M. Papini, J. Ulchni, B. Carlson and J.K. Spelt, Mixed-mode fatigue behavior of degraded toughened epoxy adhesive joints, International Journal of Adhesion and Adhesives, 31, 88-96 (2011).

N.V. Datla, M. Papini, J. Schrooder and J.K. Spelt, Modified DCB and CLS specimens for mixed-mode fatigue behavior of adhesively bonded thin sheets, International Journal of Adhesion and Adhesives, 30, 439-447 (2010).

A. Ameli, N.V. Datla, M. Papini and J.K. Spelt, Hygrothermal properties of highly toughened epoxy, Journal of Adhesion, 86, 698-725 (2010).

D. Naresh Varma and B. Gurumoorthy, Constructing medial axis transform for free-form trimmed surface, Computer-Aided Design and Applications, 2, 309-318 (2005).